- Home
- Applications
- produced water process
Refine by
Produced Water Process Product Applications
20 applications found
For most oil sand recovery is accomplished with in-situ thermal processes like Steam Assisted Gravity Drainage (SAGD) and Cyclic Steam Stimulation (CSS), where steam and chemicals are injected to the liquefy the bitumen. The treatment and recycling of the produced water used in this process has a direct impact on the cost of oil production. Aquatech provides water treatment technologies that includes the recycling of the ...
ByAquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA)
There are many industrial operations that are producing waste water and process water that is at risk of contamination with e.g. lubricating oils or cooling oils. There is also significant use of cooling water at risk of contamination through leaks in heat exchangers and condensers. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
Premium
Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. ...
ByLenntech Water Treatment based in Delfgauw, NETHERLANDS
Premium
INTRODUCTION: Capillary electrophoresis method is used for the determination of basic components in the following types of ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Many AQUA systems have been installed worldwide at satisfied customers. The waste water produced during the processing of poultry is highly polluted with proteins, fats, carbohydrates, blood, feathers and meat particles. Extensive knowledge of the poultry slaughtering process is essential in the design of an adequate water treatment installation. The method used for the internal transportation of feathers or soft offal determines ...
ByMarel Water Treatment B.V. based in Boxmeer, NETHERLANDS
Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
A constant supply of fresh drinking water on board – without keeping huge reserves of water. ...
ByAqua Innovation GmbH based in Rotkreuz, SWITZERLAND
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Superior Tank Co., Inc. manufactures Bolted Steel Tanks and Welded Steel Tanks specifically designed for the oil and other related ...
BySuperior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
ByH2O GmbH based in Steinen, GERMANY
Premium
Our filtration and separation solutions for food processing wastewater treatment produce water for recovery and recycle back to the plant, or for discharge to drain. ...
ByKovalus Separation Solutions, Inc. based in Wilmington, MASSACHUSETTS (USA)
A salt water disposal well is a disposal site for water produced as a result of the oil and gas extraction process. Produced water, also referred to as salt water, contains particulate which can cause problems for the pump bringing water into the well. Prior to injection into a salt water disposal well, it is highly beneficial for water filtration ...
ByFilter Sciences based in Fort Wayne, ALABAMA (USA)
Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Pure Water Scandinavia projects, designs and builds machines that provide you with ultrapure water according to your needs in the process of producing hydrogen. ...
ByPure Water Scandinavia AB (PWS) based in Falun, SWEDEN
With the increasing need for recycling industrial waste water – either because of limited water resources or because of stricter waste water discharge regulations – many industrial producers are considering implementation of zero liquid discharge (ZLD) filtration systems. A ZLD system contains several processes that together separate unwanted substances from the waste water to produce ...
ByPorex - Filtration Group based in Fairburn, GEORGIA (US) (USA)
Hydrogen fuel is a versatile source of clean energy that can help decarbonize difficult-to-abate applications, including high temperature applications like cement and steel production and areas where the use of electricity is not yet feasible such as long-distance transportation. Producing hydrogen through a clean energy source, such as nuclear energy from the ARC-100, can sustain the environmental benefits of hydrogen fuel as a clean energy source and increase global sustainability. The ARC-100 ...
ByARC Clean Technology, Inc. based in Saint John, NEW BRUNSWICK (CANADA)
Industrial water use accounts for between 20-30% of total water consumption in the U.S. as water plays an important role in many industrial processes. ...
BySymbios Technologies LLC. based in Fort Collins, COLORADO (USA)
Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is ...
ByBiowater Technology AS based in Tonsberg, NORWAY