- Home
- Applications
- sample handling
Refine by
Sample Handling Product Applications
24 applications found
Monitoring oxygen concentration in oxygen depleted/enriched environments is critical for process control and personnel safety in the chemical processing industry. Our O2 Monitors are suitable for laboratory or in-line process use, and utilize expendable petrochemical sensors to detect levels of O2 ranging from parts per million to 100%. ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Hydrogen Sulfide (H2S) is a toxic, flammable gas that poses a serious safety risk for those industries that extract and transport petrochemicals. Hydrated iron(III) oxide is typically used to scrub H2S from gas streams, however, it is difficult to determine when these scrubbers are depleted. Our H2S Scrubber selectively removes the gas from process streams without impacting the oxygen concentration or any other refinery components. It also indicates its useful life through a color conversion, changing from ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Nucleic acids are the building blocks of life in all living things, from plants and animal to bacteria and viruses. In research, it’s important to ascertain the purity of DNA and RNA samples prior to downstream processes. Proteins and other contaminants like phenol and salts may interfere with the sample and produce a lower absorbance ratio. This informs users that contaminants are present in the sample and allows a change to be made before contaminated sample ends up in downstream processes. Fortunately, ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Monitor hydrogen sulfide concentrations ranging from 0-10ppm to 0-100% continuously using optical absorbance and eliminate the need to replace paper tape reels. The H2S Analyzer system consists of two major components: the H2S Flow Cell and the PX2 Photometer. The flow cell, which can be connected to process line, contains the sample so that it never comes into contact with the electronics. The PX2 is connected to the flow cell via fiber optic cables, and can be mounted away from the process in an area-specific ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
CST’s Turbidimeter continuously and accurately measures turbidity using NIR spectroscopy. Turbidity measurements are important indicators in many industries and applications as they not only influence the yield of the industrial process, but also detect factors which are detrimental to a system. The Turbidimeter consists of a PX2+ used in conjunction with either an extractive flow cell or in situ transmission ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Norsk Analyse offers system integration that covers the complete cycle from process takeoff to process return, including analyser, sample handling systems, instrumentation, third party equipment and visualisation of data. ...
ByNorsk Analyse AS based in Barkåker, NORWAY
Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original ...
BySignal Group UK Ltd based in Camberley, UNITED KINGDOM
Quantifying or identifying the absence or presence of proteins by directly measuring absorbance or fluorescence provides for fast, convenient results which are critical for biopharmaceutical and bioprocess applications.Our protein analyzers are used primarily for chromatography and TFF (Tangential Flow Filtration) ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Aromatic hydrocarbons benzene, toluene, ethylbenzene, and xylene are often referred to as BTEX and are used in a multitude of products in the petrochemical, agrochemical, and pharmaceutical industries. These aromatic hydrocarbons are dangerous compounds that can cause adverse health effects and even cancer. Monitoring methods need to be rapid and reliable. CST’s BTEX Analyzer continuously and accurately measures the presence of aromatics in hydrocarbon solvents using UV ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
The Water in Ethanol Analyzer continuously measures water concentration in alcohol and displays the concentration on the unit’s touch screen display in real-time. The all-inclusive Water in Ethanol Analyzer comes preassembled in a waterproof NEMA4X enclosure with a dedicated sample flow cell outside of the enclosure. The analyzer includes a PX2+ NIR photometer with two fiber optic cables and a cross flow cell with two optical interface ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
We've created a testing solution that includes our COVID-19 testing service, sample collection testing kits, logistics and on-site sample collection provided by our partners. No need to worry about PPE, obtaining kits, sample transportation or sample collection. We handle everything! ...
ByTelomere Diagnostics, Inc. (TDx) based in Redwood City, CALIFORNIA (USA)
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
The Oil in Water Analyzer combines the PX2+ with our Front Surface Fluorescence Probe to create an analyzer that continuously and accurately measures the presence of oil in water. The all-inclusive Oil in Water Analyzer come preassembled with a PX2+ photometer attached to our Front Surface Fluorescence Probe via fiber optic cables. The analyzer is less susceptible to noise due to bubbles, reabsorption, and turbidity in the sample. The Oil in Water Analyzer is the ideal solution for your in-line process monitoring ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
The Chlorine Analyzer is designed for continuous, real-time monitoring of hypochlorite. The all-inclusive Chlorine Analyzer comes preassembled in a waterproof NEMA4X enclosure with a dedicated sample flow cell outside the enclosure. The analyzer includes a PX2+ photometer with two fiber optic cables and a flow cell with two optical interface couplers. ...
ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)
Glove boxes are designed for handling both hazardous substances and atmosphere sensitive materials. For controlled atmospheres, nitrogen dry boxes provide an isolated work environment for processing samples or handling air-sensitive materials while maintaining an anaerobic or other gas specific environment within the glove box. ...
ByIndustrial Physics Product Integrity Limited based in Thame, UNITED KINGDOM
Premium
A clean and safe environment is a pre-requisite for health and quality of life. BUCHI contributes to this by providing market-leading solutions for sample preparation and analysis to a wide range of industrial companies, environmental testing labs, consultants, and government ...
ByBUCHI based in Flawil, SWITZERLAND
An assay of this category typically comprises several complex steps (e.g., Isolation and purification of nucleic acids, PCR, detection). It is often conducted in a laboratory, not in the ...
BythinXXS Microtechnology AG, A part of IDEX HEALTH & SCIENCE, LLC based in Zweibrücken, GERMANY
X-ray photoelectron spectroscopy (XPS) is ideally suited to provide information relating to interfacial material properties that are critical to the performance of modern batteries used for power storage. It can give insights into chemical composition, elemental or chemical distribution of species, defect sites or functional groups. Importantly, AXIS spectrometers allow studies of these materials to be extended to in-situ and in-operando characterisation of model devices. ...
ByKratos Analytical Ltd. based in Wharfside, UNITED KINGDOM
Comprehensive Research & Discovery Support. Why use a LIMS in pharma? With its comprehensive, all-inclusive functionality, Lockbox LIMS supports every phase of the discovery process, from basic research, to clinical trials and to pharmaceutical GMP quality control. A LIMS is one of the most important computer applications in pharmaceutical research and development. Lockbox LIMS organizes every aspect of a biotech or pharma lab’s activities so that researchers can focus on breakthroughs, not on data ...
ByThird Wave Analytics, Inc. based in San Francisco, CALIFORNIA (USA)
The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants. The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM