- Home
- Applications
- sludge discharge
Refine by
Sludge Discharge Product Applications
9 applications found
Sludge recovery involves the recovery of valuable oils from wastewater/effluent. Whereas, sludge treatment is the reduction of the amount of organic matter, reducing sludge volume and stabilizing the organic matter for safe disposal. ...
ByPotential Engineering based in Navi Mumba, INDIA
Premium
Application: Rectangular basin 30 m x 8.5 m with two outlet funnels. Basin depth 2.8 m. Funnel depth 5.8 ...
ByNIVUS GmbH based in Eppingen, GERMANY
Premium
Application: Multi-stage container plant. Chamber size 2.4 x 2.9 x 12.2 m (w x h x d). Aerated, limed groundwater with approx. 80 mg/l iron ochre contents. Built-in lamella ...
ByNIVUS GmbH based in Eppingen, GERMANY
Premium
Application: Pipe with 0.7 m diameter, made of stainless steel. Full filled. Point of installation in telescopic ...
ByNIVUS GmbH based in Eppingen, GERMANY
In recent years, with the continuous development, papermaking industry has become one of the basic industries in China, and occupies an important position in the whole national economy. At the same time, the papermaking industries are also the heavy load consumers of deep dewatering equipment, and the running time of such load is continuous. According to the actual work situation, each manufacturer makes the sludge deep dewatering equipment application in the papermaking industry bring great economic benefit to ...
ByShanghai Techase Environment Protection Co., Ltd based in , CHINA
Plating Wastewater Treatment Application: Wastewater generated from chrome and nickel plating operations. Prior Treatment Method: Chrome and nickel streams were segregated because of characteristics. Chrome was reduced from hexavalent to trivalent state then combined with the nickel stream. The full stream was then precipitated via typical hydroxide precipitation methodology. Broad swings in the contaminate concentrations resulted in poor treatment and the facility was issued several ...
ByEcolotron, Inc. based in E. Dickinson, TEXAS (USA)
Electroplating sludge mainly comes from the solid waste generated by various electroplating waste liquids and electrolytic bath liquids of industrial electroplating plants after liquid phase chemical treatment. Due to the different production processes and treatment processes of electroplating manufacturers, the chemical composition of electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble ...
ByGuangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA
Sludge refers to the accumulated shells of dead bacteria as well as other fecal materials left from the wastewater and sewage treatment procedures. It is also commonly used to describe semi-solids that cannot be broken down by the treatment plant. Sludge can be problematic if you let it be. To heighten the process of eliminating sludge in a convenient and easy way is by the use of BioCleaner. ...
ByBiocleaner Inc. based in Monterey Park, CALIFORNIA (USA)
The benefits are the on-site production of renewable energy, which can be used to reduce electricity and gas consumption; total enhancement of low-value by-products; Production of a high-quality digestate; decrease of the «Carbon Footprint» for wastewater treatment; improvement of the entire wastewater treatment process and reduction of the sludge volume by up to 90; discharge of high-quality treated effluents, in combination with a final aerobic treatment, which meet the most ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)