- Home
- Applications
- solid liquid separation
Refine by
Solid Liquid Separation Product Applications For The Oil Gas Refineries Industry
9 applications found
Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Oil sands or, more technically, bituminous sands, are a type of unconventional petroleum deposit. Oil sands represent a vast wealth of energy reserves for the world rivaling traditional sources in quality, availability and the ability to meet the world's needs for many years into the future. The technologies for extraction of this resource are increasingly efficient, and WesTech has worked with several companies on the leading edge of these efforts and is a ready partner for new projects and plant ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Delivery assured from start to finish. From onshore drilling to refineries, we support clients with their fluid management challenges from mud temperature controls systems to fluid separation, cooking oils to crude oils. By evaluating, planning and implementing solutions designed at every stage to enhance drilling fluid performance and improve operating efficiencies, we have been successfully supporting clients globally for more than 18 years. Our experience goes beyond drilling, having carried out slop oil, ...
ByOsso Ltd based in Aberdeen, UNITED KINGDOM
Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)