- Home
- Applications
- libya
- stack emissions
Refine by
Stack Emissions Product Applications Available In Libya
58 applications found
Premium
Biomass fuel production or usage processes in energy generation. Biomass fuels such as wood pellets, bagasse and hog fuels can be burned to generate power. However, they are more susceptible to spontaneous combustion than traditional fuels such as bituminous ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Coal power generation processes (combustion monitoring, etc.). Coal remains one of the most widely-used sources of energy for power generation. Accurate monitoring is essential to demonstrate compliance with environmental regulations and to ensure safe, efficient ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Industrial emissions monitoring processes. The combustion process in power generation inevitably generates emissions of toxic gases and particulate matter. Accurate monitoring allows you to demonstrate that your process remains within the allowed emissions limits, minimizing the risks to human health and to the wider ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Waste-to-energy or waste management processes. Waste-to-energy plants burn municipal waste and use the resulting heat to generate power. Proper understanding of the combustion process is essential to ensure complete destruction of the waste ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Steel production from iron and scrap in a furnace with oxygen; benefits of temperature monitoring. Steel is typically produced by heating iron and scrap steel in a furnace with oxygen. Temperature monitoring provides several benefits in process and quality control for steel manufacture. The acknowledged leader in the field of industrial temperature measurement, We have supplied the iron and steel industry with cutting-edge equipment for more than 70 years. Today, we manufacture an extensive range of advanced ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
ENVEA’s long standing involvement with manufactures of powdered chemicals such as TiO2 and carbon black has led to the development of a wide range of ambient, emission and process monitoring systems designed to overcome often challenging monitoring conditions including acidic condensation and potential contamination. Approved measurement and monitoring systems not only protect our environment by meeting and exceeding regulatory requirements but also provide valuable feedback on process performance providing ...
ByENVEA based in Poissy, FRANCE
Premium
Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key areas of the process including storage, handling, drying activities and dust releases to atmosphere to meet and exceed regulatory environmental obligations and help improve process efficiency. ...
ByENVEA based in Poissy, FRANCE
Premium
Chemical industry processes requiring thermal monitoring. Chemical processing plants manufacture chemicals on an industrial scale. This requires accurate monitoring to ensure product quality, optimize process yield and control ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Combined heat and power (CHP) generation processes. Cogeneration plants generate both electricity and usable heat. This is a more thermally efficient process than generating electricity only. Many of the solutions for other power applications apply equally to cogeneration ...
ByLAND® based in Dronfield, UNITED KINGDOM
The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg. The analyser can be supplied in both in situ and extractive configuration to suit customers’ ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with ...
ByPollution S.r.l. based in Budrio (Bologna), ITALY
A boiler is water containing vessel which transfers heat from a fuel source (oil, gas, coal) into steam which is piped to a point where it can be used to run production equipment, to sterilize, provide heat, to steam-clean, etc. The energy given up by the steam is sufficient to convert it back into the form of water. When 100% of the steam produced is returned to be reused, the system is called a closed system. Examples of closed systems are closed steam heating, hot water heating, and “one-pipe” ...
ByEnerac, LLC based in Holbrook, NEW YORK (USA)
Kurz Thermal Insertion Mass Flow Meter systems provide proven accuracy and reliability in the most difficult of EPA Title IV applications with the ability to survive for long periods of time without ...
ByKurz Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Sitelab's UVF-Trilogy, model no. 7200-004-PAHS, includes PAHS UV module used to detect Target PAH compounds. The analyzer is factory calibrated using Sitelab's PAH calibration kits for testing soil or water. This test matches well to U.S. EPA Method 8270D and other GC/MS test methods as the sum of the 16+ regulated compounds; naphthalene, benzo[a]pyrene, plus others. Minimum detection limit is 50 ppb. ...
BySitelab Corporation based in West Newbury, MASSACHUSETTS (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Our leading PID gas sensors are recognised around the world by original equipment manufacturers for their longevity and critically their resistance to ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Auburn FilterSense provides a comprehensive range of products and services for the Cement industry, including solutions for Portland Cement MACT compliance and cement kilns burning hazardous waste. Auburn FilterSense baghouse controls and IntelliPULSE™ filter pressure cleaning technology are applied to fabric filters of all sizes, from small pulse jet collectors to large multi-compartment kiln gas cleaning systems. Multi-compartment Fabric Filter Optimization and Management Systems are designed for ...
ByAuburn based in Beverly, MASSACHUSETTS (USA)