- Home
- Applications
- toc in water
Refine by
Toc In Water Product Applications
19 applications found
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Teledyne Tekmar has been the market leader in environmental and drinking water testing for decades, having invented many of the instrumental technologies used in today’s lab. From TOC drinking water analysis to EPA compendium methods for soil and water, Tekmar has the right instrument for your ...
ByTeledyne Tekmar based in Mason, OHIO (USA)
Premium
High-technology industries use ultrapure water in their manufacturing. SnowPure’s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these ...
BySnowPure Water Technologies based in San Clemente, CALIFORNIA (USA)
Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Minimising costs through TOC measurement of CO2 concentration. Both water suppliers and water users need to know the quality of the water they are supplying, using and disposing of in order to minimise their costs. One measure of water quality is Total Organic Carbon (TOC) Analysis. TOC is the amount of carbon that is found in an organic compound. It has become an important indication of ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM
Total organic carbon measurements in the manufacturing or semiconductor industry are of big importance regarding product quality and safety in process. TOC levels inUltra Pure Water (UPW)applications are very ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY
Premium
ByAnalytik Jena - Lab-loving people based in Jena, GERMANY
Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
atg UV Technology have a range of systems specially designed for the production of high quality ultra pure water for use within a range of pharmaceutical and electronic production (semi conductors) applications. Ultrapure Water TOC Reduction De-Chlorination Ozone ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Advanced Oxidation reactions are an extension of the process whereby UV alone is used to reduce Total Organic Carbon (TOC) through the lysing of water molecules into hydroxyl radicals. Hydroxyl radicals (OH) are produced with the help of one or more primary oxidants (usually ozone or hydrogen peroxide) and ultraviolet light. This reactive species is the strongest oxidant that can be applied in water and can oxidize virtually any compound present in the ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Water is often used as a product, or as part of the manufacturing process. ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Ozone and advanced oxidation processes can selectively remove pollutants from industrial wastewater and process water, e.g. TOC, COD, BOD, cyanide, phenol, color among many other compounds. This can include discharge to surface waters or to POTW (referred to as pretreatment). Ozone can also be used to keeps wastewater sumps clean and odor ...
BySpartan Environmental Technologies, L.L.C. based in Mentor, OHIO (USA)
All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM's when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride form. Because the organics can be removed by ...
ByPuriTech Bvba based in Herentals, BELGIUM
It is ideally suited to on-line monitoring of DOC/TOC at all stages of the drinking water treatment process. In particular, the sensor can be used to continuously monitor DOC levels and alert when specific thresholds are exceeded that may interfere with the disinfection process or lead to the formation of harmful by-products. ...
ByProteus Instruments based in Harris Business Park, UNITED KINGDOM