- Home
- Applications
- used shredder
Refine by
Used Shredder Product Applications
36 applications found
Shredder is used to cut open the drums or containers filled with ...
ByITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY
SatrindTech shredders are used within the recycling lines of refrigerators. When treated properly, it is possible obtains a total of nearly 90% in different materials (among which iron, plastic, polyurethane, aluminum and copper) from these product. The two shaft shredders are used as primary crushers if used as the first step of the process as they are used for a volume reduction after the collecting cycle, while ...
BySatrindTech Srl based in Arluno, ITALY
The volume reduction of food scraps is operated for an optimization during the handling and transportation. The two-shaft shredders used for this application allows a reduction in the volume of more than 60% of the initial ...
BySatrindTech Srl based in Arluno, ITALY
The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special ...
BySatrindTech Srl based in Arluno, ITALY
Premium
Our industrial paper shredders are designed to process paper, cardboard, and pulp waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper products. In addition, industrial paper shredders are used to ensure secure and total destruction of ...
ByGranutech-Saturn Systems based in Grand Prairie, TEXAS (USA)
The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. ...
BySA Eng. based in San Vittore Olona, ITALY
Premium
Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. ...
ByGranutech-Saturn Systems based in Grand Prairie, TEXAS (USA)
For shredding OTR (Off-The-Road) tyres up to 51″, SatrindTech proposes two-shaft shredders, suitable to a volume reduction of the material. Before proceeding with the shredding phase, it is essential, however, to remove the two central rings of the tyre with a hydraulic debeader and, subsequently, to slice the tire with a hydraulic shrear so to get pieces with a proper size for being introduced in the shredder hopper. After using a two-shaft ...
BySatrindTech Srl based in Arluno, ITALY
The recovery of PE films for agricultural use is done in a dedicate treatment plant where the first operation to be done is to reduce the volume of the film using two-shaft shredders. Once shred, the material is then processed by granulators, washing and drying machines and finally extruded and pelletized using the dedicated ...
BySatrindTech Srl based in Arluno, ITALY
Made of polyethylene raffia fabric (PE) or polypropylene (PP), as well as in jute or non-woven fabric, this kind of containers are used in different industries: from material handling (raw materials food, building construction material, just to name a few). Once finished their life cycle, the big bags are reconditioned and reused or recycled in order to retrieve the polypropylene. The SatrindTech shredders are used in the different phases of the recycling process ...
BySatrindTech Srl based in Arluno, ITALY
This is exactly where Mercodor shredders are used for crushing Tetra Pak with liquids but also without liquids. ...
ByMERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY
The shredding process of aluminum cans, pressed or loosen, is done using two-shaft shredders. After that, in order to proceed with the briquetting phase, it is necessary to shred again the material using single-shaft, three- or four-shaft shredders for obtaining a controlled size. ...
BySatrindTech Srl based in Arluno, ITALY
For this reason, it is essential to obtain a uniform output material with a high specific weight. Forrec's metal scrap shredders use efficient shearing machines and hammer mills to achieve a reduction in volume, making the product shovelable. ...
ByFOR REC S.P.A. based in Santa Giustina in Colle, ITALY
All the dies of valorization/recycling of the CIW/HW start with a primary step of shredding. Since shredder 50-02 to the 12-02, according to the type of waste to be shredded, flow and required granulometry, Préciméca offers the machine adapted to your needs. Possibility of turn-key installation (handling, shredder, clasifier, magnetic seperation, etc.) or supply of single shredder, consult ...
ByPrecimeca based in Toulouse, FRANCE
The paper mill waste is the resulting from the recovering process of cellulose from used paper and cardboard. The process is carried out in a pulper that separates and hydrates the cellulose fibers, having as a result a mixture of plastic materials (about two thirds of the total), wood, waste paper, metallic material, gravel and glass fragments. If crushed and separated properly, this waste is recovered and re-used as a material in the production process or for the creation of ...
BySatrindTech Srl based in Arluno, ITALY
Shred-Tech® custom designs and manufactures Plastic Shredding Systems to reclaim post consumer and industrial plastic wastes. Dual and four shaft shredders are often used to reduce large molded items, purgings, engineered plastics, film, etc., so that they may be further granulated for reuse in molding or directly to ...
By3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA)
Premium
Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that ...
ByGranutech-Saturn Systems based in Grand Prairie, TEXAS (USA)
SSI offers a variety of low-speed, high-torque shredders for size reduction and recycling of solid, bulky waste of nearly all sizes and materials. SSI reducers and shredders are widely used to downsize commingled bulky waste as well as commercial and residential waste streams for volume reduction, to liberate and reclaim recyclables, for composting applications, and to create alternative fuel sources for ...
BySSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA)
If you’re looking for a heavy-duty shredding solution that can easily tear through some of the toughest bulky waste materials in your industry, then any of the slow-speed shredder machines from 3R-Machinery are an excellent fit. Bulky and unwieldy waste can come from a variety of sources and include many different types of materials. You need a super-tough shredder that offers high versatility in its accepted in-fed material types, high durability to withstand regular shredding of large waste items, and high ...
By3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA)
The paper mill waste is the resulting from the recovering process of cellulose from used paper and cardboard. The process is carried out in a pulper that separates and hydrates the cellulose fibers, having as a result a mixture of plastic materials (about two thirds of the total), wood, waste paper, metallic material, gravel and glass ...
BySatrindTech Srl based in Arluno, ITALY