- Home
- Applications
- waste stream
Refine by
Industries served
- Water and Wastewater
- Waste and Recycling
- Manufacturing, Other
- Oil, Gas & Refineries
- Energy
- Chemical & Pharmaceuticals
- Medical / Health Care
- Metal
- Food and Beverage
- Electronics and Computers
- Paint
- Air and Climate
- Agriculture
- Construction & Construction Materials
- Pulp & Paper
- Textile
- Environmental
- Commercial
- Mining
- Automobile & Ground Transport
- Plastics & Resins
- Printing
- Monitoring and Testing
- University / Academia / Research
- Government
Waste Stream Product Applications
240 applications found
Bollegraaf customers are able to produce high-value Refuse Derived Fuel (RDF) from the combustible components of municipal solid waste (MSW). The waste is shredded, dried and baled and then burned to produce electricity, thereby making good use of waste that otherwise might go to landfill. MSW and commercial & industrial (C&I) wastes are increasingly seen as a resource, largely driven by legislation and the increasing scarcity of some ...
ByBollegraaf Group based in  Appingedam, NETHERLANDS
Treating hazardous materials presents challenges and opportunities for waste management companies. Hazardous waste can contain both toxic and valuable materials, which call for safe methods for disposal and ...
ByTetronics Technologies Limited based in  Swindon, UNITED KINGDOM
The presence of colour in water and wastewater, even a small amount, is highly visible and affects the aesthetic value. Colour is often caused by organic matter. Forms of organic content that cause colour pollution include synthetic chemical dyes, algae species and natural dissolved organics such as lignin and ...
ByArvia Technology based in  Runcorn, UNITED KINGDOM
Dye penetrant wastewater includes the presence of a fluorescent dye at about 2-3% in the wastewater. Dye penetrants are used as a method of testing weld integrity to confirm there are no leaks. Dye Penetrant wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This however, can become quite ...
ByEncon Evaporators based in  Hooksett, NEW HAMPSHIRE (USA)
Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas ...
ByDAS Environmental Expert GmbH based in  Dresden, GERMANY
Storage of waste while at sea can take up valuable space. Using one of our on-board marine incinerators you can free up this space for more profitable activities or to simply provide more ...
ByInciner8 Limited based in  Southport, UNITED KINGDOM
Aluminum makes up about 8% of the Earth's crust by mass. Aluminum is theoretically 100% recyclable without any loss of its natural qualities. White dross from primary Aluminum production and from secondary recycling operations still contains useful quantities of Aluminum that can be extracted industrially. Aluminum is remarkable for the metal's low density and its ability to resist corrosion through the phenomenon of passivation. Growth in Aluminum production is expected to increase 5% - 7% per annum over the ...
ByAustin AI, Inc. based in  Austin, TEXAS (USA)
Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be ...
ByEncon Evaporators based in  Hooksett, NEW HAMPSHIRE (USA)
Industries including automotive, aerospace and electronics utilize processes that include metal finishing and metal working to produce or plate products and components. These processes, such as electroplating, can often result in wastewater contaminated with heavy metals that require treatment prior to recycling or discharge. Porex Tubular Membrane Filters (TMF™) provide the best option for many recycling or discharge treatment systems. The Porex membranes combine extremely rugged, durable construction for ...
ByPorex - Filtration Group based in  Fairburn, GEORGIA (US) (USA)
Wooden pallets are a staple part of most storage and distribution facilities, with warehouses, logistics firms, manufacturers and more, relying on these sturdy products to stack and move their goods. But in busy operational environments – particularly where space is at a premium – single-use pallets soon become difficult to house, and even renowned reusable wooden pallets such as the EPAL-marked Euro Pallet will reach its end of life over time. In the consumer market, comparatively small numbers of ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
Commercial vehicle washing uses a tremendous amount of water. By separating out and removing waste, clean water can be reused for great cost savings as well as saving on sewer ...
ByDraygon based in  Venice, FLORIDA (USA)
Companies and individuals in the solid waste industry are starting to receive pressure from municipalities and regulatory agencies due to high concentrations of PFAS often found in leachate due to passively receiving PFAS through a multitude of products.. Additionally, increases in hauling costs and potential rejections is leading the solid waste community to seek out solutions for PFAS removal from landfill leachate. We are able to offer services that include the pre-treatment of leachate prior to direct ...
ByECT2, a Montrose Environmental Group based in  Portland, MAINE (USA)
Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, 'polishing' of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. ...
ByGEA based in  Hudson, WISCONSIN (USA)
Manufacturers of semiconductors, batteries, printed circuit boards, LEDs and other electronic components generate significant volumes of wastewater and aqueous waste contaminated with solvents, NMP, TMAH, ammonia and other organics that require off-site trucking and disposal. Many facilities have goals to eliminate off-site waste disposal. Axine can treat these streams on-site to reduce costs and risks, streamline operations and improve ...
ByAxine Water Technologies based in  Vancouver, BRITISH COLUMBIA (CANADA)
Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This ...
ByEncon Evaporators based in  Hooksett, NEW HAMPSHIRE (USA)
PRI-MAX reducers are ideal machines to turn mixed, bulky wood waste into “floable” material streams that can be sorted and converted into usable products or energy sources for ...
BySSI Shredding Systems, Inc. based in  Wilsonville, OREGON (USA)
Bantox is a proprietary formulation of calcium silicates. It has served as our base chemical platform, allowing us to develop multiple product lines and many patents that serve a wide range of industries. Bantox stabilized waste complies not only with TCLP standards, but also with MEP (Multiple Extraction Procedure that EPA uses for long-term stability), SPLP and fresh water leach tests. For decades, silicates have stabilized heavy ...
ByThe TDJ Group, Inc based in  Barrington, ILLINOIS (USA)
Once representing a costly disposal problem for UK businesses, commercial and industrial waste is now being increasingly harnessed for its resource potential. With operators the length and breadth of the country designing savvy lines to maximise material recovery rates for reuse and recycling, the residual ‘waste’ can now be processed, with ease, for alternative fuel ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
The intelligent re-use of wood is not a new phenomenon – as one of the world’s oldest materials, this sustainable resource has been recycled and/or repurposed for thousands of years. But the global wood processing landscape continues to change extensively. In the UK, the Wood Recyclers Association has calculated that approximately 2.8 million tonnes (60%) of the country’s waste wood is being recycled – and that figure is expected to rise. In Austria, the forestry and wood processing ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
Organic Micro-pollutants are low and trace levels of synthetic organic substances released in water through human activity. They can be found in industrial, agricultural and domestic wastewater streams. Some of the most difficult-to-treat wastewater contains micro-pollutants such as persistent organic pollutants (POPs), herbicides and pesticides, personal care products (PCPs), toxic chemicals, carcinogenic and endocrine disruptive compounds (EDCs), and emerging ...
ByArvia Technology based in  Runcorn, UNITED KINGDOM