- Home
- Applications
- water main pipe
Refine by
Water Main Pipe Product Applications
4 applications found
Fire water mains are critical assets for industrial complexes such as chemical plants and refineries, since they are highly safety-related. In ageing plants, however, the smooth operation of these fire water mains is often affected by corrosion and pipe degradation. Failures may have catastrophic consequences, making maintenance of these assets indispensable. The rehabilitation of fire water mains ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Asbestos cement pipes were manufactured and installed for the transfer of drinking water until the late 20th century. They have little flexural strength and can be damaged in freeze-and-thaw conditions over a longer period of time. Furthermore, asbestos cement pipes can deteriorate because of lime-dissolving water from the inside or lime-aggressive soil from the outside. In general, the condition of these pipes is usually good enough to accommodate ground loads, however, there might be leaks in the areas of the ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Many sewer rising mains have several things in common: They are a critical asset to the owner, as it is often complicated to divert the flow for an extended period of time. The accessibility to the pipe is often difficult, as the mains run through densely populated or environmentally sensitive areas or under creeks and main roads. The pipelines often have several bends in their route. Defective sewer rising mains have the potential to cause pollution, damage property and neighbouring services, resulting in ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Many industrial pipelines operate 24/7. They transport brine or process water and are often rated to a design pressure of over 16 bar. As these pipelines are a substantial component to a respective production process of the asset owner, downtimes have to be kept to a minimum. Due to the strength of the aramid reinforcement, the Primus Line® system can be used to rehabilitate industrial pipes that are rated to a design pressure of 16 bar and above despite the low wall thickness of the liner. ...
ByRädlinger primus line GmbH based in Cham, GERMANY