Refine by
Industries served
- Monitoring and Testing
- Manufacturing, Other
- Water and Wastewater
- Air and Climate
- Oil, Gas & Refineries
- Food and Beverage
- Agriculture
- Energy
- Environmental
- Mining
- Construction & Construction Materials
- Metal
- Medical / Health Care
- Automobile & Ground Transport
- Pulp & Paper
- Soil and Groundwater
- Chemical & Pharmaceuticals
- Glassware
- Electronics and Computers
- Waste and Recycling
- University / Academia / Research
- Plastics & Resins
- Health and Safety
- Aerospace & Air Transport
- Paint
- Defense
- Commercial
- Printing
- Forestry & Wood
- Packaging
- Communications / Telecom / Datacom
- Textile
- Government
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Real Estate
- Maritime/Shipbuild/Water Transport
- Dry Cleaning
- Retail
- Leather & Tanning
Xprt Product Applications In Africa
1,976 applications found
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
UV disinfection is now a standard final treatment stage in most wastewater treatment plants worldwide. Our UV systems are widely favoured due to their environmentally friendly, chemical-free and ability to provide high-log reductions of all known micro-organisms, including chlorine resistant strains, such as Cryptosporidium. As growing environmental awareness and stricter regulations drive effluent discharge standards and water re-use initiatives to achieve greater performance, UV water treatment is fast becoming ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid. ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste ...
ByWeda Robotics based in  Södertälje, SWEDEN
Wastewater from industrial production is contaminated with various substances and as a result, effective wastewater treatment to the required limit values requires specialist knowledge. At the same time, wastewater treatment plants should be energy-efficient and conserve ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in  Rossdorf bei Darmstadt, GERMANY
Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in  Rossdorf bei Darmstadt, GERMANY
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Protea has used our VOC gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, VOC abatement plants such as scrubbers and carbon-bed systems are typical installations where the use of Protea analysers and our VOC analysis expertise have proved valuable to plant operators. They prove a very powerful and flexible tool in both process gas measurements and VOC emissions monitoring. In the laboratory, Protea can deliver instruments with all the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM