Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Mining
- Oil, Gas & Refineries
- Soil and Groundwater
- Chemical & Pharmaceuticals
- Agriculture
- Food and Beverage
- Monitoring and Testing
- Energy
- Electronics and Computers
- Pulp & Paper
- Environmental
- Air and Climate
- Forestry & Wood
- Glassware
- Medical / Health Care
- Waste and Recycling
- Maritime/Shipbuild/Water Transport
- University / Academia / Research
- Commercial
Xprt Product Applications In Algeria
162 applications found
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control ...
ByOPSIS AB based in Furulund, SWEDEN
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
ByAereon, part of Cimarron group based in Legnano (MI), ITALY
ByAereon, part of Cimarron group based in Legnano (MI), ITALY
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
Sustainability and recycling are becoming increasingly important issues. "What happens to the waste produced?" AMANDUS KAHL plants provide the answers to these ...
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
For the processing of biomass for energy recovery, AMANDUS KAHL offers its customers pelleting plants for two different ...
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
Ensure indoor comfort, safeguard assets, and comply with regulations for your hotel, university, office building, and more. SUEZ’s portfolio can help optimize your cooling towers, chillers, and ...
BySUEZ Water Technologies and Solutions based in Trevose, PENNSYLVANIA (USA)
Ship locks and lifts: A ship lock is an engineering structure which enables ships to overcome the level difference between two waterways. Water level is raised or lowered by filling or emptying the lock chambers. Filling and emptying a lock chamber is a central process of the ship lock which causes high cyclical loads on the underground. therefore, an a-priori estimate of the soil behaviour under loads is crucial for geotechnical engineers to select the best design parameters and to avoid undesired deformations on ...
ByGeotomographie GmbH based in Neuwied, GERMANY
Wind power plants: Wind turbines requires a stable foundation to derive dynamic force into an intact ground. e integrity of the subsurface needs to be inspected prior the design. Underground cavities or tunnels of man-made or natural origin may lead to undesired subsidence or foundation ...
ByGeotomographie GmbH based in Neuwied, GERMANY