Show results for
Refine by
No No2 Product Applications In Australasia
17 applications found
Premium
The measurement of pollutants such as O3, NO, NO2, CO, SO2 and HC to ppb’s and ppm’s require very sensitive analysers. ...
ByLNI Swissgas based in Torreglia (PD), ITALY
But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective Catalytic Reduction unit (SCR), which deploys ammonia gas NH3 to limit emissions of NO and NO2. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. ...
ByENVEA based in Poissy, FRANCE
Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
In addition, DG sets and loading vehicles around the site emit gaseous pollutants like NO2 and SO2, which can form nitrate and sulfate particles. Consequently, this attributes to the adverse effects on the health of the workers and residents living in the proximity. ...
ByOizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
While the applications may be standard, the performance and quality of our systems are anything but. Every unit is engineered with precision and built to deliver exceptional reliability and accuracy, far exceeding typical ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Air emissions do not only belong to the industrial sector. Transport is subject to equally strict regulations, complicated by the main feature that these vehicles accumulate: crossing national borders. The limits may become stricter depending on the territory you are travelling through, particularly for the marine ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND