- Home
- Applications
- australasia
- solid liquid separation
Show results for
Refine by
Solid Liquid Separation Product Applications In Australasia
17 applications found
It provides municipal clients and contractors a diverse range of solid liquid separation and biological treatment ...
ByHydroflux Pty Ltd based in Sydney, AUSTRALIA
The filtration systems developed by Bilfinger Water Technologies during this 30 year-experience are particularly appreciated in solid liquid separation processes and dewatering of treating effluents. These separation processes play a very important role in the chemical pharmaceutical field, being essential elements of many production ...
ByAqseptence Group GmbH based in Aarbergen, GERMANY
Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is being ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
KREBS cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning ...
ByFLSmidth A/S based in Valby, DENMARK
Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Fundamental building block chemical used in the production chain of polyethylene, PVC, styrene, ethylene glycol, vinyl acetate, linear ∂-olefins and a host of other chemical products. Eliminate hydrocarbons in Quench Water system, minimize fouling, provide greater system reliability, lower maintenance, lower energy costs. Quench water contains emulsified heavy aromatic hydrocarbon (SG = 0.975). Cracked hydrocarbons are extremely reactive. Polymerization leads to fouling of quench system, exchangers, dilution ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Widely diversified grouping of process chemicals and additives spanning functional fluids, antioxidants, catalysts, pesticides, biocides, adhesives and sealants, corrosion inhibitors, flame retardants, synthetic dyes, specialty pigments, etc. Precoat filter upgrade, increase productivity, capacity and fluid ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Purify benzene, toluene, and xylene (BTX) from refinery or petrochemical aromatics streams such as catalytic reformate or pyrolysis gasoline. This liquid-liquid extraction processes offers lower capital and operating costs, simplicity of operation, range of feedstock, and solvent ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The key aspects of an alkylation unit pertain to the amount of acid that needs to be made-up on a continuing ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Bilfinger Water Technologies designs and builds complete water recovery and slurry dewatering systems for sand and aggregate washing plants. These high-performance systems minimize water usage and solid disposal ...
ByAqseptence Group GmbH based in Aarbergen, GERMANY