Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Medical / Health Care
- Energy
- Air and Climate
- Mining
- Agriculture
- Construction & Construction Materials
- Environmental
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Glassware
- Waste and Recycling
- Automobile & Ground Transport
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Plastics & Resins
- Commercial
- Defense
- Packaging
- Printing
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Logistics
- Travel & Leisure
- Real Estate
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Domestic
Xprt Product Applications In Australia
2,284 applications found
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor has high efficiency air purges use compressed air to ensure that optical surfaces are virtually free of dust or debris contamination. This ensures minimal maintenance is required on the ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Used to detect VOCs within the Semiconductor industry, our PID Gas Sensor Technology is available with reliable resistance to ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Our PID based instruments are able to measure VOC in concentrations as low as 1 PPB. This means that our VOC detectors are ready to be used in the University and Laboratory environment to detect VOC at low levels, this can be critical to the quality of work / research taking place. Aside from safety and quality assurance based instruments, ION Science also offers a range of test and inspection instruments for this industry. ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Indoor air quality is a key part of industrial hygiene. Measuring a vast variety of compounds simultaneously helps to ensure that the air quality doesn’t threaten the health of people. Portable Gasmet gas analyzers are the ideal solution for industrial hygiene ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
The quality of water is vital in laboratories. To produce the best quality water for a laboratory, the water should be demineralised, and, in some cases, sterile. Demineralised water is completely free of dissolved minerals. When conducting tests and experiments in a laboratory, the results will be as accurate as possible, as there are no minerals in the water which could alter the outcome of the test. ...
ByAquacure Water Treatment Pty Ltd. based in  Salisbury, AUSTRALIA
We can help you to understand and manage the status, usage and efficiency of an increasing range of your fixed and mobile assets around the ...
ByOvarro based in  Eckington, UNITED KINGDOM
The digital ecosystem known as the Industrial Internet of Things has resulted in an explosion of available information in the industrial environment, resulting in the ability for smarter decision making. Servelec Technologies is developing platforms to securely harness, channel and utilise IIoT data as part of a smart network. ...
ByOvarro based in  Eckington, UNITED KINGDOM
Filtration of blood plasma and media not being allowed to get in contact with ...
ByJVK Filtration Systems GmbH based in  Georgensgmünd, GERMANY
Industrial hygiene is the set of procedures established to help control environmental factors that could affect an employee’s health. Industrial hygiene involves identifying, evaluating and, when appropriate, eliminating biological, physical and chemical agents that can be found within the work place. ECOMESURE offers a broad range of instruments to measure the air quality in factories and/or industrial plants, following working conditions ...
ByEcomesure based in  Saclay, FRANCE
Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Motor vehicle emissions are a major source of air pollution in urban areas and impact the lives of billions of people every day around the world. Motor vehicle exhaust contains toxic chemicals that are harmful to people’s health when exposed at certain levels. These toxic fumes cause smog in the atmosphere, which can affect very broad regional air sheds and contribute to the formation of cancer. Teledyne API has several products specifically designed to meet the challenging demands of near-roadside air ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer. ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Production of semiconductor materials require extremely clean air supply that help ensure the quality of the materials being manufactured as well as specialized gases to enable production to occur smoothly and efficiently. Teledyne API carries a complete line of Industrial gas process instruments including those that both produce and measure gases in these unique applications. Teledyne API also provides specialty gas instruments designed to help reduce or eliminate Airborne Molecular Contamination (AMC) in the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Food quality and safety are two of the most challenging issues in the current regulatory environment that are of great concern to today's health-conscious consumers. Increasingly, Ozone (O3) gas is being used in these important applications as an organic, economical, and environmentally friendly sanitation solution compared with conventional methods. This same approach is also becoming more prominent in the Medical industry for the same reasons. Whether you are generating ozone as part of a process or keeping your ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Sensing cable can be deployed in trenches connecting supply and return piping to detect water and/or hydrocarbon leaks. Sensing cable can monitor over long distances up to thousands of ...
ByPermAlert, a division of Perma-Pipe, Inc. based in  Niles, ILLINOIS (USA)