Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Medical / Health Care
- Energy
- Air and Climate
- Mining
- Agriculture
- Construction & Construction Materials
- Environmental
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Glassware
- Waste and Recycling
- Automobile & Ground Transport
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Plastics & Resins
- Commercial
- Defense
- Packaging
- Printing
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Logistics
- Travel & Leisure
- Real Estate
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Domestic
Xprt Product Applications In Australia
2,284 applications found
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Air emissions do not only belong to the industrial sector. Transport is subject to equally strict regulations, complicated by the main feature that these vehicles accumulate: crossing national borders. The limits may become stricter depending on the territory you are travelling through, particularly for the marine ...
ByETG Risorse e Tecnologia S.r.l. based in  Chivasso (TO), ITALY
Monitoring stations may be setup in urban environments on rooftops, near-roadway sites, or other locations to assess pollutant levels. Routine monitoring at these sites are intended to protect public health and comply with ...
ByAethlabs based in  San Francisco, CALIFORNIA (USA)
Air quality and pollution are global issues. Air pollution can come from natural and anthropogenic sources, posing detrimental effects to both human health and the environment. Because short- and long-term exposure to air pollution has been associated with a wide range of human health effects and environmental threats, it is important to determine the source and transportation of pollution and ...
ByDroplet Measurement Technologies (DMT) based in  Longmont, COLORADO (USA)
CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance ...
ByCST Industries Inc based in  Kansas City, MISSOURI (USA)
CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance ...
ByCST Industries Inc based in  Kansas City, MISSOURI (USA)
From Harvestore silos and unloaders to Slurrystore manure storage systems, no one invests in advancing agricultural productivity like ...
ByCST Industries Inc based in  Kansas City, MISSOURI (USA)
We provide a range of solutions to cover entertainment noise and music event noise measurement and monitoring. People who work in the entertainment industries or music industries can be at risk of hearing loss, additionally, outdoor music events can ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Air pollution causes millions of deaths worldwide and costs the world economy $5 trillion per year. Over 90% of the world’s population lives in places where air quality exceeds World Health Organization’s (WHO) guideline limits. Therefore, air pollution has become a major global challenge in the past years. Human activity and natural processes can both generate air pollution. Typical sources of air pollution are e.g. traffic, energy production, manufacturing and chemical industries, fumes from ...
ByGasera Ltd based in  Turku, FINLAND
A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a ...
ByPentair Filtration Solutions, LLC based in  Conroe, TEXAS (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in  Conroe, TEXAS (USA)
Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid ...
ByPentair Filtration Solutions, LLC based in  Conroe, TEXAS (USA)
Air quality monitoring is a critical task globally due to the widespread concern over air pollution. It is vital to monitor air quality to ensure that individuals and the environment are not exposed to hazardous concentrations of specific gases and ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Dissolved Gas Analysis is a method of monitoring the condition of electrical transformers and related oil filled equipment. The oil used in transformers as coolant and insulator has gases dissolved in it due to aging and faults inside the transformer. Different faults in transformers create fault gases of different kind, for example CO, CO2, CH4, C2H6, C2H4, and C2H2. The extraction and analysis of these gases gives highly reliable early indication of transformer ...
ByGasera Ltd based in  Turku, FINLAND
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in  Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in  Conroe, TEXAS (USA)
Chlorine dioxide is a well-known disinfectant for drinking water with many advantages over chlorination. Today there are estimated to be over 900 public water systems using chlorine dioxide for water disinfection world-wide. Also in Australia it is approved for a wide range of uses. However, the acceptance of chlorine dioxide in Australia as a disinfecting agent for drinking water has been hampered by the crude methods available for generating chlorine dioxide – methods that require relatively complex ...
ByNatural Water Solutions based in  Perth, AUSTRALIA
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM