- Home
- Applications
- australia
- nitrification
Show results for
Refine by
Nitrification Product Applications In Australia
14 applications found
Premium
Odors need to be kept below the "neighbor noticing" threshold. Issues with nitrification / denitrification can easily become large permitting problems. ...
ByIxom Watercare based in Dickinson, NORTH DAKOTA (USA)
TCMP was added to eliminate interference from nitrification. Oxygen uptake was measured over a five-day test period using a CHALLENGE AER-200 ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Oxidation of a third group of constituents - in this case thought to be nitrification - extends beyond six hours of contact. The test was terminated before the reaction was complete. ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Test Setup: 40 and 60 mL of wastewater were added to individual respirometer flasks each containing nutrient/mineral/buffer medium to form two different dilutions. TCMP was added to inhibit nitrification. 25 mL of seed from a laboratory scale reactor was added to each test reactor. ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
An alternative approach is to undertake toxicity reduction procedures, such as neutralisation or acid hydrolysis, in pilot-scale laboratory studies. The Respiration or the Nitrification Inhibition Test may be used for this. In the future, toxicity reduction may be stipulated by local authority, water company or publicly-owned treatment works prior to giving discharge consents. ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Premium
The Fast Response Early Boost (FREB) strategy has provided effective control in chloraminated potable water tanks during warm months when these problems are most ...
ByIxom Watercare based in Dickinson, NORTH DAKOTA (USA)
Fluence employs the following main technologies to design Waste & Wastewater treatment plants: DAF Dissolved Air Flotation: For the initial extraction of COD suitable for the anaerobic digestion Anaerobic digestion: For wastewater treatment and renewable energy generation Nitrification-denitrification process: For the final treatment of wastewater, in order to comply with regulations ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving waters, who are now using direct toxicity tests (DTA) or whole effluent toxicity tests (WET tests) in order to protect the receiving ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Sample Type: Mixed liquor solids from an activated sludge process MVLSS = 1320 ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Waste Type: Activated sludge process ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
A pharmaceutical company was interested in knowing whether a specific component, MCB, inhibited the biodegradation of other wastewater constituents. A series of respirometer tests was set up using identical mixtures of wastewater and return activated sludge (RAS) plus varying amounts of MCB. The OUR fingerprint of this wastewater includes a first peak of about 500 mg/L-hr within the first hour of contact that represents the oxidation of highly-biodegradable organic constituents. A second group of readily ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Waste Type: Complex alcohols. Objective: Certain constituents of the test waste were know to be biodegradable but were suspected of being toxic to aerobic biological processes when present in high concentrations. The objective was then to determine how much waste could be added to an activated sludge process before toxic impacts would be ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
The action of the micro-organisms on organic and complex inorganic materials, leads to the production of ammonia. When ammonia is present in water at high enough levels, it will have detrimental effects on animal life. For this reasons ammonia in a wastewater plant might be monitored and removed at different points in the process: Inflow of the WWTP - Raw wastewater intake (Using our MS3500). In the aeration lanes. At the outflow of the clarifier. At the works ...
ByMultisensor Systems Ltd. based in Cheadle, UNITED KINGDOM