Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Medical / Health Care
- Energy
- Air and Climate
- Mining
- Agriculture
- Construction & Construction Materials
- Environmental
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Glassware
- Waste and Recycling
- Automobile & Ground Transport
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Soil and Groundwater
- Electronics and Computers
- Plastics & Resins
- Commercial
- Defense
- Packaging
- Printing
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Paint
- Maritime/Shipbuild/Water Transport
- Textile
- Logistics
- Travel & Leisure
- Real Estate
- Retail
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Domestic
Xprt Product Applications In Australia
2,296 applications found
Activated Carbon is a well known adsorbent in revitalizing the natural purity of water by removing organic contaminants. Treatment of water is important so as to avoid many contagious diseases like cholera, typhoid, jaundice etc. Activated Carbon is widely used all over the world to remove the contaminations in drinking water sources and water logging after rain to tackle the outbreak of several infections. MFAR is committed to provide high grade Activated Carbon for drinking water as well as industrial water ...
ByIndoCarb Corporation Inc based in  Pittsburgh, PENNSYLVANIA (USA)
Activated Carbon is a well known adsorbent in revitalizing the natural purity of water by removing organic contaminants. Treatment of water is important so as to avoid many contagious diseases like cholera, typhoid, jaundice etc. Activated Carbon is widely used all over the world to remove the contaminations in drinking water sources and water logging after rain to tackle the outbreak of several infections. MFAR is committed to provide high grade Activated Carbon for drinking water as well as industrial water ...
ByIndoCarb Corporation Inc based in  Pittsburgh, PENNSYLVANIA (USA)
On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators ...
ByLuminUltra Technologies Ltd. based in  Fredericton, NEW BRUNSWICK (CANADA)
The highly corrosive environments found in the municipal & industrial wastewater market make it a core industry for Sauereisen and our corrosion-resistant materials. We have decades of experience in delivering quality products and services that provide dependable solutions for these aggressive environments while helping to preserve municipal and industrial assets. Whether it's restoration or new construction, Sauereisen addresses the environmental and economic challenges posed by water inflow and infiltration ...
BySauereisen Inc. based in  Pittsburgh, PENNSYLVANIA (USA)
Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire's disease to reduced operating efficiency and eventually to equipment failure via microbiologically ...
ByLuminUltra Technologies Ltd. based in  Fredericton, NEW BRUNSWICK (CANADA)
Microbial Contamination Results in Less than 5 minutes! Microbial growth in metalworking fluids presents a major problem. Storage tanks, recirculation lines, filters, and other equipment can become fouled through microbial proliferation and metabolic activity, which results in a myriad of problems. These problems include compromised product quality from microbially influenced corrosion (MIC), equipment and filter plugging, and health risks from bioaerosols. The best solution to these problems is early detection ...
ByLuminUltra Technologies Ltd. based in  Fredericton, NEW BRUNSWICK (CANADA)
The 7” colour touch screen Ultima is professionally designed to deliver appropriate solutions to all operational challenges of cooling towers including corrosion, scale and microbial growth. The comprehensive functions and user friendly navigation of Ultima allow ultimate control of your treatment program. ...
ByAquarius Technologies Pty Ltd based in  Coopers Plains, AUSTRALIA
Allsite’s TFS380 is the ultimate construction site enclosure. This weather tight, rugged, modular fabric structure has enclosed hundreds of construction and remediation sites in almost every continent and under the most extreme conditions. Internal clearances are 50% higher than competitors allowing easy operation of most excavation equipment. Over our 37 years, Allsite has developed the systems and proprietary accessories to make the Allsite TFS380 the most flexible and functional construction ...
ByWilliams Scotsman, Inc. (WillScot) based in  Phoenix, ARIZONA (USA)
Underground stormwater detention systems that allow detention are considered one of the most effective stormwater BMP systems available to control the flow of stormwater. Though the systems can be found beneath streets, parks, and parking lots, these stormwater BMPs can be used anywhere in residential and commercial areas alike. When it comes to stormwater BMPs, there are two considerations you want to keep in ...
ByNDS, Inc. based in  Lindsay, CALIFORNIA (USA)
When investing in stormwater systems, it’s important to not only consider the requirements for storage, but also consider the standards for water quality BMP and exceed them. When combined with SedimenTrap, our StormChamber system can match or exceed the expectations for sediment maintenance at such ...
ByNDS, Inc. based in  Lindsay, CALIFORNIA (USA)
A Stormchamber system with a pond liner protected with filter fabric and a pump provides a highly effective stormwater/reuse system for commercial applications. With the stacking ability of up to four layers of our SC-34 chambers, or a single layer of our larger SC-44, very large volumes can be accommodated within a relatively small footprint. This results in significant savings over the typical use of concrete vaults for those types of ...
ByNDS, Inc. based in  Lindsay, CALIFORNIA (USA)
The management of concentrates and other raw materials is a crucial yet challenging aspect of the metal trading and supply chain. Market volatility, complex contractual terms, and variations in quality and content over the life of a contract add layers of complexity to the administration and risk management of metal concentrates. Read more at www.eka1.com and www.quorgroup.com ...
ByEka Software Solutions Private Limited based in  Bengaluru, INDIA
Commodity trading of LME-traded metals involves navigating a complex and volatile marketplace influenced by various global factors like price swings, supply chain risks, changing regulatory environment which present various challenges for all stakeholders involved. The ability to mitigate these challenges by developing strategies for risk management, hedging and forecasting are crucial for success. Read more at www.eka1.com and www.quorgroup.com ...
ByEka Software Solutions Private Limited based in  Bengaluru, INDIA
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
ByDekati Ltd. based in  Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in  Kangasala, FINLAND
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle Measuring Systems has been involved in particle counting for aerospace and defense applications for 40 years. This includes everything from spacecraft assembly to building a particle monitor for use on other planets. In 1978, a PMS particle counter was onboard the Pioneer Venus Project. Our latest technologies meet the needs of a new competitive era, where both private and government aerospace entities can thrive. We understand the unique challenges of this ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)