Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Chemical & Pharmaceuticals
- Environmental
- Oil, Gas & Refineries
- Agriculture
- Mining
- Construction & Construction Materials
- Metal
- Food and Beverage
- Medical / Health Care
- Pulp & Paper
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Aerospace & Air Transport
- Glassware
- Plastics & Resins
- Printing
- University / Academia / Research
- Defense
- Commercial
- Logistics
- Forestry & Wood
- Retail
- Paint
- Communications / Telecom / Datacom
- Textile
- Dry Cleaning
- Packaging
- Travel & Leisure
- Government
Xprt Product Applications In Austria
1,097 applications found
Aerobic and anaerobic digestion processes form a key part of the UK’s evolving bioenergy infrastructure, and it is no secret that the resource potential of organic substances is optimised if the ‘waste’ is homogenised before it reaches the digestion technology. Shredding for AD is therefore one of the most important pre-treatment processes to take place, before innovative bacteria and stimulants can get to work to produce a ...
ByUntha Shredding Technology Gmbh based in Kuchl, AUSTRIA
Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous ...
ByEcosorb by OMI Industries based in Palatine, ILLINOIS (USA)
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Sometimes an 'off the shelf' water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Procal supplies the oil refining industry with both process and emission monitoring analysers to meet a wide range of ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
Procal analysers are used throughout the steel process from initial sintering of ore, coke production, blast furnace emissions through to roll mill reheat furnace ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants. The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
A key issue in the measurement of the products of combustion in Cement and Lime industries is the high levels of particulates. The Procal 2000 in situ analyser's heated probe option is especially suited to this industry as it efficiently deals with variations in process temperature, keeping the probe above the sample dew point and safe from corrosive ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
Procal´s analysers are used extensively in reporting and control applications in modern Biomass plants. The flexible and reliable instruments form the heart of the systems, enabling CO, NO2, NO, SO2, H2O, CO2, O2, dust and velocity to be ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg. The analyser can be supplied in both in situ and extractive configuration to suit customers’ ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM
Dairy raw wastewater is characterized by high concentrations and fluctuations of organic matter and nutrient loads related to the discontinuity in the cheese production cycle and machinery washing. Because the dairy industry is a major water user and wastewater generator, it is a potential candidate for wastewater reuse. Biowater’s wastewater system is based on highly efficient biofilm technology and is ideal for this type of application, one that requires pretreatment prior to discharge to a municipal ...
ByBiowater Technology AS based in Tonsberg, NORWAY
Wastewater treatment processes considered for this industry must address industry specific nuances like slug discharges of pulp, stormwater runoff and air emissions for compounds such as total reduced sulfur ...
ByBiowater Technology AS based in Tonsberg, NORWAY
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS