- Home
- Applications
- austria
- analysis system
Refine by
Analysis System Product Applications In Austria
46 applications found
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
How clean is the ambient air in our cities? A common strategy for monitoring the air quality in a city is to measure at ground level where people actually live and are at risk of exposure to air pollution. Often, there is also a requirement that the measurements are made in a place where you can expect the air pollution to be relatively high, which often means along one of the city's busier streets. Limit values for air quality often apply precisely to these locations. OPSIS offers several monitoring systems for ...
ByOPSIS AB based in  Furulund, SWEDEN
There are several reasons why ARTeMIS software for Operational Modal Analysis (OMA) is a popular tool in wind turbine ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Premium
The reason 3DViewStation is often the tool of choice is due to its modern user interface, high-performance viewing, advanced analysis and integration capability into leading systems. ...
ByKISTERS AG based in  Aachen, GERMANY
Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Smart planning of infrastructure projects and maintenance of assets has a significant benefit to the entire community. With a growing number of end users and increasing data volumes, today's transportation agencies are managing a larger number of departmental integration issues than ever before. You need a sustainable solution for your infrastructure investment. Deighton has been providing sustainable infrastructure asset management solutions and services for more than 31 years. We are an industry leader. We ...
ByDeighton based in  Whitby, ONTARIO (CANADA)
You might wonder what Operational Modal Analysis, OMA, is and how it differs from the traditional Experimental Modal Analysis (EMA) that has been around for the past few decades. Operational Modal Analysis is also called output-only modal analysis, ambient response analysis, ambient modal analysis, in-operation modal analysis, and natural input modal ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
The complexity of a state of the art production process requires the control and analysis of material within different production steps. Using industrial data analysis by intercorrelating the vast amount of data coming from various sensor systems in the line allows perfect control and prediction of resources yield and maintenance cycles in your facility. EVK is your partner in establishing state of the art process analysis and control using their ...
ByEVK DI Kerschhaggl GmbH based in  Raaba/Graz, AUSTRIA
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
ARTeMIS Modal Pro has a series of plugin modules designed for Structural Health Monitoring purposes. All modules are designed to analyse and present the health of a monitored structure in various manners, and they all rely on the same common data manager base module. This module administrates the recorded measurement files as well as the results obtained during a periodic ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The accurate measurement of a gas mixture is essential to metal and mineral processing. Reliable measurements are needed to manage processes ranging from effective combustion control to optimized process ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Ruminant livestock generates a significant proportion of anthropogenic GHG emissions, and thereby contribute to Climate Change. Ruminants such as cattle, sheep, goats and buffalo produce meat and milk through enteric fermentation – a digestive process in which microbes decompose and ferment food in the digestive tract or rumen. This process produces methane which is emitted via belching. The amount of methane produced is directly related to the type of food consumed and the level of intake, in addition to ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM