- Home
- Applications
- austria
- ftir analyzer
Show results for
Refine by
Ftir Analyzer Product Applications In Austria
49 applications found
In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The Gasmet™ GT5000 Terra portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
A customer had a requirement for continuous Ethyl Acrylate monitoring. The process operations emit multiple Acrylate species, all at low concentrations, but only Ethyl Acrylate being reportable to the EA under the terms of the IPC permit. A 204M FTIR analyser was deployed and a chemometric model was built specifically to target Acrylates, with the purpose of separating and accurately quantify the target Ethyl Acrylate species. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The quality of compressed breathing gases for aircraft, diving and marine has very tight limits imposed by bodies such as NATO and national bodies such as MOD. The test requirements are for contaminants such as CO, CO2, Total VOC, CFCs and halogenated hydrocarbons, as well as H2O and O2 content. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Typical modern printing processes utilize solvent-based dyes. The evaporation of the dye solvents into the ambient air during the printing process may expose the workers to various chemicals. Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The mining industry uses chemicals as ‘flotation’ agents in the recovery of sulphide minerals containing metallic elements (e.g., copper, nickel, silver, gold) from ore slurries. Sodium ethyl xanthate (SEX) is one of most common flotation agents, and it decomposes to form ethanol, carbon disulfide CS2, and Carbonyl Sulfide COS. These harmful gaseous compounds must be monitored from the indoor air at the enriching ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND