Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Chemical & Pharmaceuticals
- Environmental
- Oil, Gas & Refineries
- Agriculture
- Mining
- Construction & Construction Materials
- Food and Beverage
- Metal
- Medical / Health Care
- Pulp & Paper
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Aerospace & Air Transport
- Glassware
- Plastics & Resins
- Printing
- University / Academia / Research
- Defense
- Commercial
- Logistics
- Forestry & Wood
- Paint
- Communications / Telecom / Datacom
- Textile
- Retail
- Dry Cleaning
- Travel & Leisure
- Government
- Packaging
Xprt Product Applications In Austria
1,097 applications found
The responsible care for the environment and the availability of energy resources are increasingly taking centre stage. We are planning for this, and exceed your requirements in respect to heat exchange in the fields of energy and heating, and of power stations and environmental ...
ByAPL Apparatebau GmbH based in Hopfgarten, AUSTRIA
FIBALON® tool has a highly durable special fiber. For the treatment of cooling lubricants, drilling fluids and abrasives, FIBALON® tool represents an innovative alternative compared to conventional systems such as cen-trifuges or belt filter systems. Heating water is water, which is located in a closed system. This flows through the boiler, where it is heated and finally reaches by means of pumps or gravity the radiator. The cooled heating water flows back to the boiler and the cycle begins again. The ...
ByFibalon GmbH based in Neumarkt/OPf., GERMANY
Water utilities across the world are faced with the challenge of managing an aging network of assets. 2030-2050 is predicted in almost all utilities asset management plans to be the major peak in utilities renewals. By using the recommended treatments coming out of dTIMS, the opportunity exists to perform an optimization on all of the assets within the road right of way, such as potable water, wastewater, and stormwater. ...
ByDeighton based in Whitby, ONTARIO (CANADA)
Due to the high temperatures that are generated by evacuated tubes, split systems can be used for many industrial ...
ByGreenTechSolar based in Nedanovce, SLOVAKIA
Solar heating system can be used to support certain kinds of heating ...
ByGreenTechSolar based in Nedanovce, SLOVAKIA
Processing recyclable and disposable materials out of C&D waste. C&D waste can include almost anything from wood to stones. The TANA Shark can easily handle waste wood, plastics, aluminum profiles, insulation materials and reasonable amounts of ...
ByTana Oy based in Jyvaskyla, FINLAND
Commercial and industrial waste typically contains different kinds of packaging materials, like hard and soft plastics, cardboard, paper, wires, paper rolls, containers, aluminium, gypsum or any reject from production line of a manufacturing process, sand paper for instance. In other words, a wide variety of different kinds of materials with various requirement to the machines it is treated with. TANA shredders are widely used in treatment of this variety of ...
ByTana Oy based in Jyvaskyla, FINLAND
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
ByTana Oy based in Jyvaskyla, FINLAND
Ragger wire or pulper tail is the residue of steel wires and plastic that remains after a pulping process. A mass of recyclable paper is being processed with the help of water. The remaining mass, consisting of wires and plastics of the bales, is called ragger wire. It is often landfilled because no method or machinery can separate the material cost efficiently. But when you can the recovered steel easily justifies the purchase of a TANA shredder. The rest can be landfilled or used as alternative ...
ByTana Oy based in Jyvaskyla, FINLAND
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
ByAirmodus Oy based in Helsinki, FINLAND
End-of-life mattresses are notoriously difficult to move, store and process, which means they’re widely considered a huge headache for the resource sector. Some operators would even go so far as to presume they’re economically unshreddable. Until now… As UNTHA’s innovation has continued, so too have the possibilities when it comes to mattress shredding. We want to put a stop to the 167,000 tonnes of mattresses – that’s 7.5 million units – sent to landfill in the UK, ...
ByUntha Shredding Technology Gmbh based in Kuchl, AUSTRIA
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
Monitoring of emissions from incinerators is a demanding application for Continuous Emission Monitoring Systems. The emissions produced are highly corrosive, some of the gases are soluble and, because the waste being burnt is constantly changing, the resulting stack gas temperature varies ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and ...
ByProcal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs). ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
PTR-MS for ultra-sensitive real-time monitoring of air pollutants. IONICON PTR-MS systems are well established tools in environmental research. Their fast response-times and ultra-low detection limits help researchers all over the planet to better understand the world we live in. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA