Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Chemical & Pharmaceuticals
- Environmental
- Oil, Gas & Refineries
- Agriculture
- Mining
- Construction & Construction Materials
- Food and Beverage
- Metal
- Medical / Health Care
- Pulp & Paper
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Aerospace & Air Transport
- Glassware
- Plastics & Resins
- Printing
- University / Academia / Research
- Defense
- Commercial
- Logistics
- Forestry & Wood
- Paint
- Communications / Telecom / Datacom
- Textile
- Retail
- Dry Cleaning
- Travel & Leisure
- Government
- Packaging
Xprt Product Applications In Austria
1,097 applications found
Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of ...
ByEmiControls based in Bolzano, ITALY
For applications in the food industry, granulation presses (agglomeration by compression) are offered, for example for the manufacture of instant products, as well as extruders for the production of ...
ByAmandus Kahl GmbH & Co. KG based in Reinbek, GERMANY
Hygienic, food grade tube and hose pumps and food pumps; Food products such as dairy, baked goods, cereals, beverages and confectionary demand pumps that meet today’s hygiene standards and are able to handle products with ...
ByVerder Liquids BV - part of the Verder Group based in Vleuten, NETHERLANDS
STS pressure transducers and transmitters are manufactured to meet the most demanding test and measurement specifications for the aviation industry. The product portfolio includes absolute, gauge (relative) pressure and miniature pressure ...
BySTS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND
With its technologies, GIG Karasek had a lasting influence on the production processes in the food industry and food production. It will continue to be our challenge to identify trends and needs in an early stage and to set benchmarks in new technologies. Competence and strength in Food production – ask for our application ...
ByGKT GmbH based in Gloggnitz, AUSTRIA
Mechanical treatment as the foundation for recycling: The reuse of materials and energy from waste is central to modern waste management. The foundation for it is laid by mechanical preparation in the form of waste splitting. In it, recyclables are recovered from the waste stream and high-yield combustibles are separated out for further processing as refusederived fuels (RDF). The remaining residue fraction can be stabilized and then ...
ByKomptech GmbH based in Frohnleiten, AUSTRIA
Polimaster provides effective solutions for inspection of raw materials and waste, control of personnel exposure, internal control of IR source, and other demanding radiation measurement ...
ByPolimaster based in Nemezio Sen, LITHUANIA
Dewesoft offers unique vehicle performance, vehicle dynamics, vehicle durability, combustion, electric and hybrid engine testing capabilities. Unique range of supported data interfaces (Analog, Digital, Counters, CAN, CAN FD, OBDII, J1393, XCP/CCP, FlexRay, Kistler Wheels, Video, GPS, IMUs, etc.) with pin-point synchronisation offers an all-in-one solution for all kinds of vehicles, from passenger cars, autonomous cars, trucks, heavy machinery, ships and airborne vehicles. The entire data acquisition process, from ...
ByDEWESoft based in Trbovlje, SLOVENIA
Rotating machinery analysis is primarily concerned with signals relating to the rotational speed and its harmonics. Orders are harmonics of the rotational speed. Evaluating orders can be critically important on many types of rotating machines. Dewesoft offers easy to use solutions for order tracking, torsional vibration, FFT and octave band ...
ByDEWESoft based in Trbovlje, SLOVENIA
Dewesoft provides easy to use, yet advanced solutions for acoustics analysis. Sound Level Meter, Sound Power, Sound Intensity, Octave Band Analysis and Reverberation Time RT60 are just some applications that are covered. All test are performed according to international ...
ByDEWESoft based in Trbovlje, SLOVENIA
Dewesoft offers a variety of solutions for aerospace industry. From standard data recording, structural dynamics, rotating machinery analysis to a more specific application like ground station solutions like PCM telemetry, Chapter 10, ARINC-429, MIL-STD-1553 and iNet support. This section covers these ...
ByDEWESoft based in Trbovlje, SLOVENIA
All methods for Experimental Modal Analysis in ARTeMIS Modal are born multiple input multiple output polyreference methods. This means that the techniques are capable of estimating closely space modes and even repeated modes with a high degree of accuracy. Below there is an example of a perfectly symmetric structure where the polyreference methods have been applied on a setup with two reference accelerometers and a rowing impact hammer. ...
ByStructural Vibration Solutions A/S based in Aalborg East, DENMARK
The areas of utilization of our valves in the food and beverage industry are diverse and primarily comprise their application in systems, silos as well as for water treatment ...
ByKlinger Fluid Control GmbH - KLINGER Group based in Gumpoldskirchen / Österreich, AUSTRIA
c-square bioscience technology enables ongoing monitoring of the microbial load of bacteria, fungi and yeasts and dynamically adjusts the dosing of suitable biocides in the white water. This reduces the formation of biofilm and ensures a trouble-free production process. Depending on the installation density, ongoing testing of raw materials such as slurries and coating colors is also possible. A significant reduction in biocides is achieved through the dynamic adjustment of the respective dosing ...
Byc-square bioscience GmbH based in Tulln an der Donau, AUSTRIA
c-square bioscience technology enables the continuous automated checking of the microbial load of bacteria, fungi and yeasts and dynamically adjusts the dosage of suitable biocides. Our automated monitoring and dosing system is particularly suitable for central systems. This keeps the infection level low and extends the change or refill interval of cooling lubricants. A reduction in biocide quantities with a simultaneous increase in quality is the result of our overall ...
Byc-square bioscience GmbH based in Tulln an der Donau, AUSTRIA
Extensive in-process damage to the external diameter of the Tuyere Cooler component, used in Blast Furnace operations, is a common occurrence and can lead to reduced processing capability and equipment downtime. This is especially pertinent when the substrate damage results in the Tuyere becoming lodged in the parent housing and having to be forcibly removed. Tata Steel together with Castolin Eutectic have developed a thermal spray deposition which would help negate the potential damage to the component and thus ...
ByCastolin Eutectic GmbH based in Kriftel, GERMANY
Wind energy may prove to be the key to achieving energy independence in mountain tourism with significant advantages such as lower electricity tariffs and the possibility of producing energy on-site while ensuring maximum respect for the climate and surrounding nature. ...
ByLeitwind SPA based in Vipiteno (BZ), ITALY
In Metal Industry, checks during all the production processes are extremely necessary, starting from raw material quality control and primary material fusion, up to quality verification before shipping the final product. During all manufacturing phases, forming, molding, die-casting, extrusion, mechanical manufacturing, it is necessary evaluate different chemical-physical parameters in order to give the essential information for production cycle. GNR offers advanced solutions to perform different and wide ...
ByG.N.R. S.r.l. based in Agrate Conturbia, ITALY
In today’s throwaway society, waste electrical and electronic equipment (WEEE) poses one of the world’s biggest recycling problems. Despite stringent regulations, more than 2 million tonnes of WEEE are produced and discarded every year, in the UK alone. But within every piece of ‘redundant’ equipment lie a number of high-value component parts that – in line with the waste hierarchy – should be liberated, segregated and recycled. It doesn’t just make environmental sense ...
ByUntha Shredding Technology Gmbh based in Kuchl, AUSTRIA
Regarding the environment and the impact of industry and consumers grow, environmental regulations are developing in line to meet stricter standards. The diversity of sample forms, such as pressed or loose powders, liquids, solid pieces, and the range and concentrations of elements being monitored, present several challenges to those in the industry. GNR could offer TXRF and X-Ray Diffraction (XRD) solutions as essential tools for environmental investigations and ...
ByG.N.R. S.r.l. based in Agrate Conturbia, ITALY