Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Chemical & Pharmaceuticals
- Environmental
- Oil, Gas & Refineries
- Agriculture
- Mining
- Construction & Construction Materials
- Metal
- Food and Beverage
- Medical / Health Care
- Pulp & Paper
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Aerospace & Air Transport
- Glassware
- Plastics & Resins
- Printing
- University / Academia / Research
- Defense
- Commercial
- Logistics
- Forestry & Wood
- Retail
- Paint
- Communications / Telecom / Datacom
- Textile
- Dry Cleaning
- Packaging
- Travel & Leisure
- Government
Xprt Product Applications In Austria
1,097 applications found
c-square bioscience technology enables ongoing monitoring of the microbial load of bacteria, fungi and yeasts and dynamically adjusts the dosing of suitable biocides in the white water. This reduces the formation of biofilm and ensures a trouble-free production process. Depending on the installation density, ongoing testing of raw materials such as slurries and coating colors is also possible. A significant reduction in biocides is achieved through the dynamic adjustment of the respective dosing ...
Byc-square bioscience GmbH based in  Tulln an der Donau, AUSTRIA
c-square bioscience technology enables the continuous automated checking of the microbial load of bacteria, fungi and yeasts and dynamically adjusts the dosage of suitable biocides. Our automated monitoring and dosing system is particularly suitable for central systems. This keeps the infection level low and extends the change or refill interval of cooling lubricants. A reduction in biocide quantities with a simultaneous increase in quality is the result of our overall ...
Byc-square bioscience GmbH based in  Tulln an der Donau, AUSTRIA
Extensive in-process damage to the external diameter of the Tuyere Cooler component, used in Blast Furnace operations, is a common occurrence and can lead to reduced processing capability and equipment downtime. This is especially pertinent when the substrate damage results in the Tuyere becoming lodged in the parent housing and having to be forcibly removed. Tata Steel together with Castolin Eutectic have developed a thermal spray deposition which would help negate the potential damage to the component and thus ...
ByCastolin Eutectic GmbH based in  Kriftel, GERMANY
Wind energy may prove to be the key to achieving energy independence in mountain tourism with significant advantages such as lower electricity tariffs and the possibility of producing energy on-site while ensuring maximum respect for the climate and surrounding nature. ...
ByLeitwind SPA based in  Vipiteno (BZ), ITALY
In Metal Industry, checks during all the production processes are extremely necessary, starting from raw material quality control and primary material fusion, up to quality verification before shipping the final product. During all manufacturing phases, forming, molding, die-casting, extrusion, mechanical manufacturing, it is necessary evaluate different chemical-physical parameters in order to give the essential information for production cycle. GNR offers advanced solutions to perform different and wide ...
ByG.N.R. S.r.l. based in  Agrate Conturbia, ITALY
In today’s throwaway society, waste electrical and electronic equipment (WEEE) poses one of the world’s biggest recycling problems. Despite stringent regulations, more than 2 million tonnes of WEEE are produced and discarded every year, in the UK alone. But within every piece of ‘redundant’ equipment lie a number of high-value component parts that – in line with the waste hierarchy – should be liberated, segregated and recycled. It doesn’t just make environmental sense ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
Regarding the environment and the impact of industry and consumers grow, environmental regulations are developing in line to meet stricter standards. The diversity of sample forms, such as pressed or loose powders, liquids, solid pieces, and the range and concentrations of elements being monitored, present several challenges to those in the industry. GNR could offer TXRF and X-Ray Diffraction (XRD) solutions as essential tools for environmental investigations and ...
ByG.N.R. S.r.l. based in  Agrate Conturbia, ITALY
Advanced clinical analysis is more and more related to the development of new forms of analysis for different medical and forensic objectives. In the Forensic domain, the adoption of analytical instrumentation to reveal the smallest traces of evidence plays a key role in today’s forensic laboratories. Full chain of custody and data control is also desired across all stages of the process. TXRF is an unsurpassed tool granting not destructive tests using a very limited quantity of sample, granting the lowest ...
ByG.N.R. S.r.l. based in  Agrate Conturbia, ITALY
Some materials are typically considered too complex to shred. A number of operators steer away from handling hazardous wastes such as batteries, contaminated drums and ABP-contaminated plastics for example, or clinical wastes including soiled dressings, surgical gowns and sanitary products, due to their corrosive nature. But this seemingly high risk waste does still have a resource value, and shredders exist that ARE up to the job. So, rather than sending these difficult-to-decompose materials to landfill – ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
As a raw material, metal can be repeatedly returned to the resource cycle with very little loss, but the success – and value – of the process greatly depends on the cleanliness of the materials recovered. With the commodity rate of metals constantly fluctuating, the quality yield from a recycling line therefore needs to be as high as ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
By comprehensively shredding confidential waste and other classified materials, data owners and processors benefit from utmost peace of mind that sensitive information will never end up in the wrong hands. But there is often more to security shredding, than the safe disposal of confidential ‘waste’. It is possible to destroy the data or other protected elements, without ruining the resource value of the product ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
Problems we solve: Microbial contamination in bioreactors often goes undetected until product loss occurs. Not detecting low-viability cells reduces efficiency. Delayed lab results slow down decision-making in critical phases. Inability to track microbial subpopulations or phenotype shifts. High labor costs and limited skilled microscopy staff availability. Rare contaminants or early infections are hard to detect. Lack of data to optimize yield or identify process ...
ByHolloid based in  Wien, AUSTRIA
Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable ...
ByEcosorb by OMI Industries based in  Palatine, ILLINOIS (USA)
Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Aroma real-time quantification with PTR-MS. Rapid screening for complex aroma systems. Rich chemical fingerprints due to soft ionization. Real-time sampling: high throughput. Ideal for chemometric data-mining methods. ...
ByIonicon Analytik Ges.m.b.H. based in  Innsbruck, AUSTRIA
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
The management of noise from mining operations is recognized as a fundamental responsibility of the mining industry. Implementing a noise management system that includes noise surveys, day and night noise mitigation, and some level of noise monitoring is a primary function that is required to meet environmental impact standards in most ...
ByLarson Davis, a division of PCB Piezotronics based in  Depew, NEW YORK (USA)
Many industrial operations take place over lengthy time periods and operations often continue 24 hours a day. By implementing a 24 hour noise monitoring system, with real-time communication and alert notification, a plant can demonstrate to the community and regulatory agencies that they are sensitive to the community and prepared to root-cause and correct any problems that may ...
ByLarson Davis, a division of PCB Piezotronics based in  Depew, NEW YORK (USA)
Whether you are in the city, suburb or at a weekend getaway location, noise is an important factor in determining your quality of life or the success of your business. Many areas have local noise legislation that defines the noise limits that can be produced and experienced during the day or at night. This noise may be generated by vehicle traffic, aircraft, industrial sites, construction projects, entertainment events, or many other ...
ByLarson Davis, a division of PCB Piezotronics based in  Depew, NEW YORK (USA)