Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Manufacturing, Other
- Energy
- Waste and Recycling
- Chemical & Pharmaceuticals
- Environmental
- Oil, Gas & Refineries
- Agriculture
- Mining
- Construction & Construction Materials
- Metal
- Food and Beverage
- Medical / Health Care
- Pulp & Paper
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Aerospace & Air Transport
- Glassware
- Plastics & Resins
- Printing
- University / Academia / Research
- Defense
- Commercial
- Logistics
- Forestry & Wood
- Retail
- Paint
- Communications / Telecom / Datacom
- Textile
- Dry Cleaning
- Packaging
- Travel & Leisure
- Government
Xprt Product Applications In Austria
1,097 applications found
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in Dexter, MICHIGAN (USA)
The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste ...
ByWeda Robotics based in Södertälje, SWEDEN
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
BymicroLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS
Wastewater from industrial production is contaminated with various substances and as a result, effective wastewater treatment to the required limit values requires specialist knowledge. At the same time, wastewater treatment plants should be energy-efficient and conserve ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in Rossdorf bei Darmstadt, GERMANY
Protea has used our VOC gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, VOC abatement plants such as scrubbers and carbon-bed systems are typical installations where the use of Protea analysers and our VOC analysis expertise have proved valuable to plant operators. They prove a very powerful and flexible tool in both process gas measurements and VOC emissions monitoring. In the laboratory, Protea can deliver instruments with all the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works ...
ByAquaread Ltd, Part of the NKE Group based in Broadstairs, UNITED KINGDOM
The accurate measurement of a gas mixture is essential to metal and mineral processing. Reliable measurements are needed to manage processes ranging from effective combustion control to optimized process ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND