Refine by
Industries served
- Monitoring and Testing
- Agriculture
- Food and Beverage
- Manufacturing, Other
- Oil, Gas & Refineries
- Environmental
- Water and Wastewater
- Chemical & Pharmaceuticals
- Medical / Health Care
- Paint
- Mining
- Construction & Construction Materials
- Electronics and Computers
- Pulp & Paper
- Waste and Recycling
- Soil and Groundwater
- Energy
- Automobile & Ground Transport
- Metal
- Air and Climate
- University / Academia / Research
- Defense
- Glassware
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Travel & Leisure
- Retail
- Commercial
Xprt Product Applications In Belarus
217 applications found
Premium
Monitoring in raw gas places high demands on the instruments. The temperatures are high and the gases are often reactive. There may also be high dust levels. In order to control flue gas cleaning, the monitoring systems must also be able to react in near real time. However, these are no problems for OPSIS non-contact monitoring systems, which work excellently in these circumstances, with high availability and low operating ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
In recent years, increasingly strict requirements have been introduced to minimise sulfur emissions from shipping. One way to comply is to run the ships with low-sulfur oil, but this can be expensive. An alternative that makes it possible to continue using high-sulfur oil as fuel is to install SO2 scrubbers that clean the flue gases to the same level as if the ships were fueled with low-sulfur oil. However, the scrubbers must be monitored by measuring the ratio of SO2 to CO2 concentrations. Here, OPSIS has a ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
There can be several purposes for monitoring the air quality in an urban area. If the aim is to assess what the residents are exposed to in the worst case, a so-called street-level monitoring is carried out. If the aim is to monitor the general levels of air pollution and follow up long-term trends, you should instead monitor further away from the busiest roads, for example at roof level. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring the air quality at and around airports can be done for several reasons. It may be a question of monitoring the pollutants that employees and passengers are exposed to, but it may also be a matter of studying the contribution of aviation and ground traffic to pollution. Regardless of purpose, monitoring can be a challenge. The location of the measurement site must be representative. A large number of gaseous components need to be monitored with high accuracy and high ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Benzene monitoring around refineries: Measuring benzene emissions from a refinery plant can be challenging, but OPSIS makes it easy. Benzene is a liquid hydrocarbon that evaporates rapidly when exposed to ambient air. It is one of the more common substances used in the chemical industry and is particularly prevalent at refineries and similar operations. Benzene causes cancer and is therefore subject to ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
ByOPSIS AB based in Furulund, SWEDEN
Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen ...
ByHermann Sewerin GmbH based in Gütersloh, GERMANY
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in Kyiv, UKRAINE
The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Bread contributes about one-sixth of daily salt intake and is used to improve flavour and texture. The amount of sodium in bread can differ significantly, depending upon brand and type of grain used, ranging from 592mg/100g to 748mg/100g. The level of sodium in bread is primarily due to the amount of salt added to the dough during manufacture. The amount of potassium is determined by the type of flour and the washing and bleaching operations during cereal processing. Bread does not make a significant contribution ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
According to the International Committee on Illumination CIE recommendations, luminance should be monitored as the luminance contained within in a conical field of view, subtending an angle of 20º. It is recommended that a luminance photometer is mounted in the tunnel approach road approximately 120 - 200 metres from the portal, depending on the approach speed of the vehicles and their stopping distance. The purpose of monitoring the luminance at the portal is to adjust the level of light intensity inside the ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
XRF analysis is a simple and fast method for quantitative analysis of silicate materials, cements, ceramics and natural minerals. The main advantages of X-ray fluorescence analysis are simplicity of sample preparation, high accuracy and speed of ...
ByElvatech Ltd. based in Kyiv, UKRAINE
For modern archaeology, X-ray fluorescence analyzers have become indispensable helpers in daily research activities. The simplicity and speed of the analyzers, developed by Elvatech will lead to significant acceleration the daily work of determination of the chemical composition, age, the way of production and use of various archaeological ...
ByElvatech Ltd. based in Kyiv, UKRAINE
One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Tunnel ventilation systems are designed to enable a sufficient throughput of air to be maintained to ensure a safe operating environment for users. These systems consume large amounts of power and need to be operated as efficiently as possible. To do this it is necessary to know the effectiveness of the system in terms of air flow and direction developed within the tunnel. The TunnelTech 301 is a single point ultrasonic flow monitor that is unaffected by traffic flow and sound reflections. It is designed to ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM