Refine by
Industries served
- Monitoring and Testing
- Agriculture
- Manufacturing, Other
- Food and Beverage
- Oil, Gas & Refineries
- Environmental
- Water and Wastewater
- Medical / Health Care
- Paint
- Chemical & Pharmaceuticals
- Mining
- Electronics and Computers
- Pulp & Paper
- Waste and Recycling
- Soil and Groundwater
- Energy
- Construction & Construction Materials
- Automobile & Ground Transport
- Metal
- Air and Climate
- University / Academia / Research
- Defense
- Glassware
- Retail
- Commercial
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Travel & Leisure
Xprt Product Applications In Belarus
217 applications found
Premium
Monitoring the air quality at and around airports can be done for several reasons. It may be a question of monitoring the pollutants that employees and passengers are exposed to, but it may also be a matter of studying the contribution of aviation and ground traffic to pollution. Regardless of purpose, monitoring can be a challenge. The location of the measurement site must be representative. A large number of gaseous components need to be monitored with high accuracy and high ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS offers monitoring systems for continuous emissions monitoring and process control at power plants. The systems meet and exceed high demands on availability, speed, versatility, and low operating ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring in raw gas places high demands on the instruments. The temperatures are high and the gases are often reactive. There may also be high dust levels. In order to control flue gas cleaning, the monitoring systems must also be able to react in near real time. However, these are no problems for OPSIS non-contact monitoring systems, which work excellently in these circumstances, with high availability and low operating ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Benzene monitoring around refineries: Measuring benzene emissions from a refinery plant can be challenging, but OPSIS makes it easy. Benzene is a liquid hydrocarbon that evaporates rapidly when exposed to ambient air. It is one of the more common substances used in the chemical industry and is particularly prevalent at refineries and similar operations. Benzene causes cancer and is therefore subject to ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
In recent years, increasingly strict requirements have been introduced to minimise sulfur emissions from shipping. One way to comply is to run the ships with low-sulfur oil, but this can be expensive. An alternative that makes it possible to continue using high-sulfur oil as fuel is to install SO2 scrubbers that clean the flue gases to the same level as if the ships were fueled with low-sulfur oil. However, the scrubbers must be monitored by measuring the ratio of SO2 to CO2 concentrations. Here, OPSIS has a ...
ByOPSIS AB based in Furulund, SWEDEN
Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen ...
ByHermann Sewerin GmbH based in Gütersloh, GERMANY
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in Kyiv, UKRAINE
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Bread contributes about one-sixth of daily salt intake and is used to improve flavour and texture. The amount of sodium in bread can differ significantly, depending upon brand and type of grain used, ranging from 592mg/100g to 748mg/100g. The level of sodium in bread is primarily due to the amount of salt added to the dough during manufacture. The amount of potassium is determined by the type of flour and the washing and bleaching operations during cereal processing. Bread does not make a significant contribution ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
According to the International Committee on Illumination CIE recommendations, luminance should be monitored as the luminance contained within in a conical field of view, subtending an angle of 20º. It is recommended that a luminance photometer is mounted in the tunnel approach road approximately 120 - 200 metres from the portal, depending on the approach speed of the vehicles and their stopping distance. The purpose of monitoring the luminance at the portal is to adjust the level of light intensity inside the ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM