Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Energy
- Agriculture
- Medical / Health Care
- Air and Climate
- Oil, Gas & Refineries
- Food and Beverage
- Chemical & Pharmaceuticals
- Construction & Construction Materials
- Waste and Recycling
- Metal
- Pulp & Paper
- Environmental
- Automobile & Ground Transport
- Mining
- Electronics and Computers
- Glassware
- Soil and Groundwater
- Aerospace & Air Transport
- University / Academia / Research
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Health and Safety
- Defense
- Commercial
- Logistics
- Printing
- Travel & Leisure
- Retail
- Packaging
- Plastics & Resins
- Government
- Paint
- Textile
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Forestry & Wood
Xprt Product Applications In Belgium
1,096 applications found
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY
LaserGas measurements Preheater exit, CO monitoring Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention Coal silo, CO monitoring Exit of coal mill, dust filter, CO monitoring Stack gas emissions, HCl and HF LaserDust measurements Stack gas emissions Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY
Environmental engineering’s agency Colsen b.v. designs, specifies and executes building site direction of several kinds of wastewater treatment installations for industrial- and communal wastewater. These installations are designed to deal with the local climatological conditions and specific customer ...
ByColsen International b.v. based in Hulst, NETHERLANDS
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in Dexter, MICHIGAN (USA)
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
BymicroLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS
Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions to the atmosphere. Read about our solutions for aluminum ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
VACOMASS® jet control valve and elliptic diaphragm control valve are especially developed and optimized for control and distribution of air into aeration tanks. They can be operated both with a very low pressure drop at high repeatabilty and control ...
ByBinder Group GmbH based in Ulm, GERMANY