belgium
Applications

Xprt Product Applications In Belgium

1,096 applications found

In Belgium Available In Belgium Near Belgium

Methane gas leak detection

Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal's EyeCGas Optical Gas Imaging camera, for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in ...

ByOPGAL based in Karmiel, ISRAEL

Continuous emissions monitoring for combustion industries

ByHORIBA Europe GmbH based in Leichlingen, GERMANY

Gas monitoring and dust monitoring for the powerplants industry

LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...

ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY

Gas monitoring and dust monitoring for the cement industry

LaserGas measurements Preheater exit, CO monitoring Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention Coal silo, CO monitoring Exit of coal mill, dust filter, CO monitoring Stack gas emissions, HCl and HF LaserDust measurements Stack gas emissions Coal silo, explosion prevention ...

ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY

Gas monitoring instruments and systems for stack testing

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas analyzers and monitoring systems for waste incineration sector

Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for DeNOx process control

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for engine emissions measurements

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for nitric acid process

Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for semiconductor manufacturing

In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas analyzers and monitoring systems for Cement production

Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is an important part of cement production. Cement manufacturers need to monitor these emissions continuously according to local emission regulations. Read about our solutions to the cement ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas analyzers and monitoring systems for Raw gas measurements

Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND