- Home
- Applications
- canada alberta
- cooling system
Show results for
Refine by
Cooling System Product Applications In Alberta
16 applications found
Premium
Benefit from culture-independent PCR methods for microbiological testing of condensates from evaporative cooling systems, for example, which allow results to be obtained in just a few hours instead of ...
ByAnalytik Jena - an EndressHauser Company based in Jena, GERMANY
The Situation:Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil. These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often use once through cooling water systems. The cooling water is taken from ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system. ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Premium
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
ByAcme Engineering Prod. Ltd. based in Mount-Royal, QUEBEC (CANADA)
Premium
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
ByAcme Engineering Prod. Ltd. based in Mount-Royal, QUEBEC (CANADA)
Spire Metering is a great fit for Power Plant, Thermal Energy Production ...
BySpire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA)
At many commercial facilities, the time and resources devoted to the operations of a water treatment system are often limited. ChemTreat understands the diverse and unique needs of this sector and provides solutions for the challenges faced within the ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
The Situation: A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could result in a discharge violation. The local regulators frequently inspected the plant’s discharge to ensure compliance with the ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
During both the production and regeneration phases of the catalyst life cycle, cooling is a vital step that enables operators to ensure optimal quality, preserve cracking sensitivities and mitigate material degradation and deactivation. Solex Thermal Science offers an indirect heat transfer solution for catalyst cooling that uses fluids and not air to reduce energy consumption, eliminate emissions, minimize product abrasion and offer the ability to recover low-grade energy in small, medium and large production ...
BySolex Thermal Science based in Calgary, ALBERTA (CANADA)
Ethylene, styrene, ammonia, methanol, and other chemical producers require sustainable utility treatment results. Our technology focus is on reducing corrosion and fouling, while meeting compliance, safety regulations, and alternative water resource ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Mining has a wide range of health and safety hazards that are different from those in other industries. Hazards are introduced through the mining processes, machinery and mobile equipment such as large vehicles. Risks can increase as mines in general get deeper and more expansive. If these hazards are left unchecked, the resulting hazards can cause serious injuries, death or occupational ...
ByConcept Controls Inc based in Burnaby, BRITISH COLUMBIA (CANADA)
The power industry is unique in its need for corrosion control methods. Having a blend of above and below grade infrastructure components, the power industry must contend with both atmospheric corrosion for above ground structures and electrolysis on buried or submerged metallic structures within facilities. ...
ByMobiltex Data Ltd. based in Calgary, ALBERTA (CANADA)
The petroleum refining industry uses a wide range of processes, from separation, petroleum conversion, and petroleum treatment to waste water management. Each of these processes has its own challenges and all are made more complex by the variety of products and contaminants in the process. Two key areas, from the water management perspective, are cooling water and waste water treatment. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can also occur. A UV fluorescence oil in water monitor from Turner Designs Hydrocarbon Instruments can ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)