- Home
- Applications
- canada british columbia
- air testing
Refine by
Air Testing Product Applications In British Columbia
11 applications found
Premium
When it comes to combustion control, your air/fuel ratio (AFR) is vitally important. If you have too much fuel, you get incomplete combustion which costs money and reduces productivity. Too little fuel can cause wear and premature damage to your engines. Mass flow meters and controllers from Sierra Instruments are designed for precise fuel flow measurement, so you can optimize your AFR for ideal ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
Air compressors, used in many industrial processes, consume a great deal of energy in the form of electricity. Sierra's flow meters for compressed air precisely measure the compressed air outputs, so companies can pinpoint usage spikes, leakage rates and determine when service or upgrades are required. Conducting compressed air audits significantly increases profitability and efficiency when completed with the proper compressed air flow ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
With a proven installed base of over 15,000 units, Sierra’s line of inline and insertion thermal mass flow meters are the meter of choice to increase boiler efficiency and improve overall energy management for facilities. ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
When melting glass and metals, flame temperatures must be precisely controlled. Measuring the air/fuel ratio with quality flow meters maintains more consistent melt temperatures for improved quality and reduced energy costs. Sierra Instruments manufactures mass flow meters and controllers to help burner control systems run at peak efficiency. Use our Mass Flow Controller Selection Chart to find the right measurement solution for your ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
The US EPA’s method 30B is designed as a reference method for determination of mercury emissions with stack gases. The method uses sorbent traps to capture total mercury from stack gas. Use of different sorbent traps also enables mercury speciation measurement. Method 30B is widely used for regulatory CEMM verification and for national and international research programs. This technology was also adopted for PRC (HJ 917-2017) and EC (TS ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
We are GHG Certified: US EPA CFR 40 Part 98 put industry on notice that secondary emissions from small boilers must be accounted for accurately. Sierra responded with GHG certified mass flow meters to support our customers with this requirement. Immersible thermal mass flow meters are an economical and acceptable way to measure GHG for EPA compliance. Our BoilerTrak 620S was designed specifically for this ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Cooper Environmental's Xact 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter ...
ByCooper Environmental / Sailbri Cooper Inc. based in Tigard, OREGON (USA)
The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification ...
ByCooper Environmental / Sailbri Cooper Inc. based in Tigard, OREGON (USA)
Premium
Many industrial facilities use compressed air in their processes. Since this compressed air is very expensive to produce due to high energy costs, it is critical for facilities and campuses to accurately measure their air flow usage. To accomplish this task, facilities managers conduct compressed air audits to determine usage rates. These audits, using an industrial air flow meter measuring in Cubic Feet Per Minute or CFM, uncover inefficiencies and identify leaks in the compressed air system. Since air flow of ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
Clean coal technology relies on our high temperature thermal flow meters to measure preheated combustion air in the large ducts feeding to the coal fired burners for maximum efficiency. Our vortex flow meters are ideal for steam, water and air flows as ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as ...
ByBureau Veritas North America, Inc. based in New York, NEW YORK (USA)