- Home
- Applications
- canada ontario
- level controller
Show results for
Refine by
Level Controller Product Applications In Ontario
27 applications found
Level and flow monitoring of lift and pump stations allow operators to program pump start and stop levels, allowing the process to be used to its full capacity and prevents damage done to pumps and other assets from running dry. Thanks to state-of-the-art pump control technology, pumps are able to be auto-reset and it allows for the best use of most efficient pumps. ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Leachate level control is a primary function in landfills. Although different types of pumps are used, all pumps need to be installed with a totalizing counter mounted at the top of the well head to monitor the pump cycles and to calculate the total volume of leachate removed from the well. Instead of manually monitoring the leachate level and collecting the pump count data, use FlexPower™ Counter Nodes to wirelessly send data from the pumps back to a ...
ByBanner Engineering Corp. based in  Minneapolis, MINNESOTA (USA)
Lagoon level measurement can sometimes be difficult to install and get right. However, accurate and reliable readings of lagoon levels help to ensure that readings taken can be compared to high/low level alarms set within the control system and aids companies with water monitoring, reporting, and compliance. Non-contacting technology means that engineers don't have to get out into the lagoon to monitor water levels and can have an ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
When it comes to water monitoring in the environment, Pulsar Measurement have a wide range of products, from level, to pump control and applications with limited access to power. Our area x velocity products can be used to give an early indication of a rising river level and velocity, these two variables can be monitored separately to trend the relationship or calculated to give an overall flow ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Pulsar Measurement provide many different flow and level solutions to this market, from flow monitoring, to level monitoring, pump control and sand in oil detection. ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Landfill leachate can be very aggressive and made up of lots of different toxic substances, this is where non-contacting level monitoring and control is beneficial, as it means staff do not come into contact with the liquid and can view the level of leachate tanks at a safe distance. There are other level monitoring opportunities in glass cullets and limetank ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Landfill leachate can be very aggressive and made up of lots of different toxic substances. This is where non-contacting level monitoring and control is beneficial, as it means staff do not come into contact with the liquid and can view the level of leachate tanks at a safe distance. There are other level monitoring opportunities in glass cullets and lime tank ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Sometimes our highways agencies and workers need to use brine tanks and other chemical storage tanks while working on our infrastructure. Non-contacting tank level measurement makes stock control easier and can alert staff when levels are at a critical ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Carbon dioxide is an industrial gas used in the pulp and paper industry to control pH levels, enhance pulp yield, and wash bleached stock. As an industrial gas, oxygen helps you meet stringent environmental regulations through use in delignification, oxidative extraction and wastewater ...
ByFox Thermal based in  Marina, CALIFORNIA (USA)
Tank level monitoring comes in all shapes and sizes. Pulsar offers a wide range of transducers that range from 0-40 m (0 - 131.2 ft), as well as accompanying controllers that all have a range of pre-programmed tank shapes and the possibility to create your own. Non-contacting tank level monitoring can offer some serious advantages, especially when looking at Ferric dosing tanks, for many health and safety reasons. ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
A correlation is believed to exist between TOC concentrations and the levels of endotoxins and microbes. Sustaining low TOC levels helps to control levels of endotoxins and microbes and thereby the development of biofilm ...
ByTeledyne Tekmar based in  Mason, OHIO (USA)
A cleanroom is a controlled environment that has a low level of pollutants such as gas, dust, airborne microbes, aerosol particles, and chemical vapors. A cleanroom has a controlled level of contamination. The quality of air within a cleanroom is critical. Whether it be for the manufacturing of pharmaceutical products, for operating theatres or sterile services departments there is a legal obligation to have a qualified validation team certify the ...
ByGasera Ltd based in  Turku, FINLAND
Premium
Application: Wastewater lifting facility with three spiral conveyors. Delivery head approx. 9.00 ...
ByNIVUS GmbH based in  Eppingen, GERMANY
Premium
Application: Well diameter 1.8 m. Depth of well 6.5 m. Two wet installed pumps. Pressure pipe installed in the ...
ByNIVUS GmbH based in  Eppingen, GERMANY
On remote sites, tank level monitoring and automation are tools that can essentially make or break entire operations. Whether these tanks are for water level, fertilizer level, feed level or chemical level - every site manager is different and therefore needs to be able to customize their monitoring system to achieve maximum potential. Pulsar Measurement provides products that are suited to both liquid level and ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
The need to remove and separate liquids as well as contaminants is fundamental to the oil and gas industry; from exploration through production, transportation, refining right up to point of ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Premium
Food and beverage processors need to measure ingredient levels in storage and process silos, mixers, and batching tanks, or on conveyors and in pipelines. To ensure food quality, level sensors must comply with FSMA food safety and meet hygienic, CIP or clean-in-place requirements to reduce the risk of contamination and prevent out-of-spec batches. From brewing to baby food, and solids to slurries, BinMaster has solutions for inventory monitoring and flow detection to optimize uptime and supply chain management. ...
ByBinMaster Sensors and Technologies LLC based in  Lincoln, NEBRASKA (USA)
Premium
The temperatures are high and the gases are often reactive. There may also be high dust levels. In order to control flue gas cleaning, the monitoring systems must also be able to react in near real time. ...
ByOPSIS AB based in  Furulund, SWEDEN
Gas monitors controlling heat treatment of metals. Endothermic process and heat treatments are essential for ensuring high-quality metal and alloy products. Heat treatments are commonly used to alter the physical or chemical properties of materials such as metals and alloys, including steel. Heat treatments result in changes in material microstructures that provide increased hardness, temperature resistance, ductility, and ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in  Livingston, UNITED KINGDOM
Managing overall environmental control is essential for electronics manufacturing processes and operations as well as facilities like battery dry rooms that provide mission critical low dew point ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)