- Home
- Applications
- canada ontario
- material testing
Refine by
Material Testing Product Applications In Ontario
9 applications found
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Moisture content analysis for medical devices has never been easy. The resins are sophisticated and very expensive, the customers are demanding, and a minuscule cosmetic defect can mean the difference between thousands of dollars of saleable finished goods and scrap. When working with the complex, high-volatile-content materials that make up modern medical devices, every part per million counts, and every gram of resin counts. That’s why Computrac designed the Vapor Pro ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
If you make a living on chemical reactions, you know that accurate moisture, solids and ash content control is critical to a successful reaction. Whether your product is organic or inorganic, flammable or flame-retardant, exotic or commoditized, Computrac has an instrument that will help you make your process more productive, more reliable, and more profitable. The Computrac line of instruments can provide primary measurements for solids content, ash content, total volatile content, and water-specific moisture ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Compliance with the ASTM method at low concentrations sulfur. Sulfur is a major element of importance because it forms sulfuric acid in the atmosphere when burned and has harmful impact on the human health and on the environment. In the mid-2000's, the Environmental Protection Agency (EPA) began a program to greatly reduce the amount of Sulfur in petroleum products. The current allowable sulfur limit in vehicle fuel is 15 ppm (parts per million). To reduce the pollution coming from vessels the international ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Coating analysis can tell you a lot about the contents of material, item, etc. The simplest example: one can measure the content of a detail made from a certain alloy without its damage. Another way to apply the analysis is by measuring the jewelry to identify harmful or excessive impurities and gilding. Coating thickness analysis finds its way to be applied in almost every sphere of heavy and light industry, building, utility, ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Shimadzu's Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of ...
ByShimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA)
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these ...
ByElvatech Ltd. based in Kyiv, UKRAINE