- Home
- Applications
- canada ontario
- sample preparation
Refine by
Sample Preparation Product Applications In Ontario
47 applications found
The main advantages of X-ray fluorescence analysis are simplicity of sample preparation, high accuracy and speed of ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Non invasive, non destructive and no sample preparation required. Monitor each step of your production for instant process control ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
The XRF method makes it possible to perform efficient quantitative element analysis of soils with a minimum of sample ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Using ED-XRF allows to measure a wide range of elements and concentrations: C(6)-Fm(100), without any need of sample preparations. Samples can be measured in many different formats such as powder, solid, liquid or in thin ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
One of the most frequent applications for furnaces is the ashing of food and feedstuff samples – Carbolite’s AAF ashing furnaces remove all organic material from a sample through heating in air. The objective of the test is often to establish the total mineral content or is used as an intermediate step in sample preparation to allow subsequent characterisation by elemental analysis. ...
ByCarbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM
It provides an on-site analysis of ore samples with minimal sample preparation, reducing the time for lab assay from days to minutes. Usage of the fundamental parameters method allows analyzing an ore sample without the need for any calibration standards. The capability of precise analysis of light elements is very important for understanding sample mineralogy, and it is critical for the analysis of certain types of minerals such ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Using ED-XRF allows to measure a wide range of elements and concentrations - C(6)-Fm(100) - without the need for sample preparations (heating or destroying the sample). Samples can be measured in the form of loose powders or pressed into pellets and ready for measurement within ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Using ED-XRF allows measuring a wide range of elemental concentrations such as C(6)-Fm(100), without a need for sample preparations(heating or destroying the sample). Samples can be measured in the form of loose powders or powders pressed into pellets, and are made ready for measuring within ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
The sample of biodiesel is weighed into a crucible and placed in a heating muffle furnace. Two temperatures are used in the heating program for the dry decomposition: the first temperature (250ºC) is maintained for 1 hour to dry the sample. After this the temperature is progressively elevated to 600ºC and maintained for 4 hours to eliminate the remaining organic material. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This technique allows use of aqueous standards for calibration rather than relatively unstable organometallic standards and harmful solvents for the extraction. Microemulsions are thermodynamically stable systems composed of water, oil and surfactant. In some cases, an alcohol is added as a ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
It supports comprehensive case management by organizing case details and linking necessary tasks related to sample preparation, analysis, and review. Revol LIMS facilitates the creation of customized reports in multiple formats and maintains a secure chain of custody using advanced methods for authentication. ...
ByRevol based in Kanyakumari, INDIA
The CONFOCHECK is a dedicated FT-IR system for the fast, easy and sensitive analysis of aqueous samples. Using this system, preparing, measuring and evaluating any aqueous sample takes typically about 1 ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Premium
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
ByMetrohm AG based in Herisau, SWITZERLAND
Premium
Today’s food and beverages (F&B) are much more than just simple "organic fuels" needed for survival. Beyond their nutritive value, they are consumed for their taste or flavor. Increasingly, they are also a source for maintaining health and enhancing our well-being via high-quality nutrition. At the same time, with an ever-increasing number of processed foods, food quality and safety aspects are becoming more important. All the more because foods are highly complex materials – prone to degradation ...
ByMetrohm AG based in Herisau, SWITZERLAND
Catalytic converters in cars are used for the reduction of hazardous emissions, such as carbon monoxide (CO), hydrocarbons (HxCy), and nitrogen oxides (NOx). These harmful substances are converted into neutral carbon dioxide (CO2), water, and nitrogen by catalytic chemical reactions, which are accelerated by three platinum group metals (PGM): platinum, palladium, and rhodium. In the context of recycling, specialized analyzer for catalytic converter, often based on XRF technology, are invaluable for accurately ...
ByElvatech Ltd. based in Kyiv, UKRAINE
This method has been adapted to enable measurement of lithium over a wide range of concentrations (0.10 to >8.0%), in lithium containing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This method for the measurement of sodium and potassium in silicate rocks uses a borate fusion ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This method allows the direct measurement of low levels of sodium without prior extraction procedures, which minimises possible sources of contamination. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM