Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Energy
- Environmental
- Air and Climate
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,215 applications found
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Multi-gas Stack Analyzers for Continuous Emissions Monitoring. FTIR and UVDOAS Analyzer Models available for Insitu Probe, Internal or External Cells, or Cross Stack Sample ...
ByCerex Monitoring Solutions, LLC. based in  Atlanta, GEORGIA (US) (USA)
State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. A landfill site is a site for the disposal of waste materials by burial. Historically, landfills have been the most common method of organised waste disposal and remain so in many places around the world. Some landfills are also used for waste management purposes, such as the temporary storage, consolidation, and transfer, or processing of waste materials. Landfill gas is created by the action of microorganisms within a landfill. This includes ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in  Livingston, UNITED KINGDOM
Our Continuous Emission Monitoring (CEMS) DAS solution supports multiple emission regulation requirements and can work virtually anywhere in the world. We currently have a number of installations in North America and Middle East. Starting from Feb. 2014, after successful completion of the MCERTS certification process, the solution is offered in United Kingdom and other European countries. We are also interested in selling our products in Asia, South America and Australia ...
ByLimesoft Inc. based in  London, ONTARIO (CANADA)
This method uses a suspension of ground plant material to directly measure the potassium concentration. It eliminates the usual steps of ashing and subsequent dissolution of the resulting ash. The method was compared to alternative methods such as chemical analysis and spectrophotometric methods. Collaborative studies using a range of samples gave a mean of 1.74% potassium by this extraction technique as compared to 1.75% by alternative methods. The standard deviation of an analysis in the two different sample ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a stabiliser. These European Standards specify a method for the determination of potassium of ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Wine is of particular interest nutritionally because it is typically low in sodium and relatively high in potassium. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The downstream industry includes the oil refineries, petrochemical plants, petroleum product distributors and natural gas distribution companies.All of these operations contain many processes that require monitoring ...
ByControl Instruments Corporation (CIC) based in  Fairfield, NEW JERSEY (USA)
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
Hydrocarbon Processing is one of the most demanding industries in the world. High levels of productivity must be achieved while constantly maintaining the very highest safety standards. Effective gas analysis is a critical component of all HP processes, typically requiring a wide range of measurements to ensure the safe, optimized running of the ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
The accurate measurement of a gas mixture composition is essential to a wide range of industries and processes. Whatever your application, the key to this success is effective gas analysis you can trust to keep your operations ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
EyeCSite 2.0 is the industry-leading quantification software, offering a wide range of functionalities that detects, alerts and quantifies emissions in a very simplified and user-friendly interface, without the need for a close contact analyzer. ...
ByOPGAL based in  Karmiel, ISRAEL
SmartCEMS Statistical Hybrid PEMS is used as a compliance monitoring solution for boilers, heaters, reformers, distillation, and other a variety of sources at chemical production facilities. CMC’s SmartCEMS with Data eLements provide a complete compliance monitoring system for 40 CFR Part 60 compliance. CMC Solutions will guarantee certification of its PEMS products for use in compliance monitoring. CMC’s virtual process analyzer (VPA) product is used for optimization, backup analysis, and pollution ...
ByCMC Solutions, LLC based in  Farmington Hills, MICHIGAN (USA)