Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Energy
- Air and Climate
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,216 applications found
Sludge biosolids processing in a resource recovery facility is a critical operation for efficient running of any plant. For some facilities it is also the feed process into generating electricity, harvesting biogas, and producing reusable biosolids. There is no room for unplanned downtime or poorly operating equipment in the sludge biosolids systems. JWC Environmental offers a selection of products to keep sludge moving, protect critical processes as well as thicken ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
Meat Processing Equipment: JWC offers a variety of meat processing equipment and assists in meat processing wastewater. Meat processing facilities produce wastewater with heavy loads of fats, oils, grease and solids. Before sending that water down the sewer drain, pre-treatment is required to remove as much of these solids as possible. Devising the most cost-effective treatment process is where facilities directors stand to make the most meaningful impact on their bottom line. The right combination of equipment, ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
Agricultural waste streams utilize a wide range of production equipment that requires protection from solids that can cause damage or shut down an operation. JWC Monster shredders are an ideal solution for slicing down agricultural waste to protect equipment from damage, precondition solids for anaerobic digestions and prevent process pump clogs. JWC Monster shredders can easily slice through fruits, vegetables, seeds, meat, and trash in seconds to reduce agricultural waste into small particles. JWC shredders ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
Swampy terrain, wet areas and soft soils: Ideal territory for Neuson harvesters. Because of their large footprint, the resulting low ground contact pressure of the machines and their symmetrical weight distribution, Neuson Forest tracked harvesters are ideally suited to all the challenges of wet ...
ByNeuson Forest GmbH based in  Linz, AUSTRIA
Verification of compliance with the maximum permissible exposure levels through measurements or calculations. Designation of noise zones and noise optimisation of ...
BySoundPLAN GmbH based in  Backnang, GERMANY
Calculation of noise immissions from all relevant noise sources. If necessary, definition of noise quota allocation according to DIN 45691 for commercial and industrial sites or conception of noise protection measures (active/passive). Great support in planning optimisation, urban development competitions and in determining the development ...
BySoundPLAN GmbH based in  Backnang, GERMANY
The Situation: A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system. The power plant engines are fired-up on short notice to meet the needs of the dispatcher. The engines produce power ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in  Edmonton, ALBERTA (CANADA)
Non-contacting sludge blanket monitoring ensures that operators do not have to come into contact with the sludge. When used on primary settlement tanks the Sludge Finder 2 controls the de-sludging process to ensure a higher sludge density is recovered. When used on final settlement tanks it can be used to reduce the chances of a pollution event. The unique Sludge Finder 2 control system can also provide significant cost savings from less runtime on pumping systems and less energy spent on dewatering. By allowing ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Chamber and digester monitoring often refers to the part of the wastewater process where the solids are removed from the treated water and pumped to a chamber and/or digester ready for further processing. The range of technology at Pulsar means that the monitoring of this process becomes a lot easier and more efficient. An indication of tank level and flow rate can be given, providing operators full visibility of the process and an idea as to whether there is a blockage forming. Due to the nature of this ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Many mining applications use a settlement process - this is where all the particles and solids settle within tanks / clarifiers. In the past, measurements of these tanks have been labor intensive and puts operators at risk. Non-contacting interface measurement allows this process to be automated and reduce the health and safety issues that arise when trying to measure sludge interface ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
The monitoring and control of processes is crucial to ensure that plants are operating efficiently and effectively, preventing as much down time as possible and ensuring that they are operating to their full potential. This often means monitoring tank levels to ensure maximum stock / refill processes or monitoring flow to ensure that flows are running at capacity. Often, the measurement substance within the metals and mining industry can be extremely abrasive. Contacting magmeters are subject to increased risk of ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Drilling mud is usually pumped down the hollow drill pipe to the drill bit where it exits the pipe and is then flushed back up the brehole to the surface. Some muds are then discharged into the environment (via regulated methods), and others are recirculated back into the process for reuse. Pulsar Measurement provide flow solutions to ensure that drilling muds are flowing through pipes at the correct rate, giving an indication of blockages or issues within the process and aids oil and gas manufacturers with ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Storage tanks are used throughout the oil and gas industry for the bulk containment of fluids at different stages of the refinery process. More often than not, products will be stored for a short period of time before being transported for further processing. Pulsar Measurement offer both ultrasonic and radar technologies, along with a range of transducer faces to ensure the product is robust and resiliant against harsh atmospheric conditions. Accurate tank level and volume measurement eradicates the health and ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
A retention pond's primary use is to manage stormwater runoff to prevent flooding and downstream erosion, with the aim of improving water quality in an adjacent river, stream, lake or bay. Oil and Gas companies may use this particular form of water storage to perhaps mitigate flood risks of operations and/or to help the quality of water sources nearby, especially if they are discharging back into the environment. Non-contacting level measurement would be ideal for these applications as engineers don't need to go ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Fish Hatchery and Processing plants often need tight control over feed silos and to be able to monitor the constant flow of fresh water in fish ponds as well as keeping an eye on offal tanks. Pulsar Measurement's non-contacting technology has an advantage in this market, with its simple and easy installation and the fact that it does not come into contact with the application at all. It also aids health and safety compliance and helps to make the process simpler and easier for ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
The environment is increasingly affected by the pollutant concentration such as nitrogen and sulfur oxides in the atmosphere, or particles from industrial activities. In order to understand how best to improve our air quality, many smart cities have been engaged in monitoring air quality. ECOMESURE offers instruments that measure and analyse the air quality, as well as the proportion of polluting particles and gases in the ...
ByEcomesure based in  Saclay, FRANCE
SolarWall systems have been used on elementary schools, high schools, colleges and universities across North America, from Arctic schools in remote communities to urban campuses of all sorts. Clean SolarWall heating represents one of the most progressive technologies that can be used for carbon reductions; and it provides a leaning tool for students while also ensuring a high level of indoor air quality, which has been shown to improve cognitive function! ...
ByConserval Engineering Inc. based in  Toronto, ONTARIO (CANADA)
Carrots, Beets, Turnips, Cabbage, Broccoli, Cauliflower, Brussel Sprouts, Lettuce Etc: Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this cultivation. ...
ByTexas BioTechnology Inc based in  Richmond, TEXAS (USA)
1st application: Time: during soil preparation or at planting. Soil or foliage: Soil. Amount and dilution rate: See the Table 1. Area: per 1 hectare ...
ByTexas BioTechnology Inc based in  Richmond, TEXAS (USA)
Note: If pesticide residue degradation required dilute 2 liters (67oz) of RezFree with 1000 lt (264 gal) of water and spray on foliage 10-15 days before harvest on 1 hectare. Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this ...
ByTexas BioTechnology Inc based in  Richmond, TEXAS (USA)