Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Air and Climate
- Energy
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,203 applications found
The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. Freshwater treatment systems can be damaged by hydrocarbons or allow them to pass through undetected. Desalination systems using reverse osmosis (RO) membranes can be irreversibly damaged by the presence of ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Protea was asked to supply a high level ammonia (NH3) measurement system for a waste water treatment plant. The reflux drums at the inlet to two ammonia stripping towers needed to be measured continuously. Protea designed a solution based around our Solus TDLAS analyser platform and a high level dilution system. The Solus analyser was configured for NH3 measurements in the range 0-500ppm. A dilution system incorporating special dilution probe and 19' control panel was installed before the analyser. This gave a ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The engineered wood products industry relies on Dürr for regenerative thermal oxidizer (RTO), regenerative catalytic oxidizer (RCO), wet electrostatic precipitator (WESP) and wet scrubber technologies for effective control of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and blue haze from wood dryers and press vents. ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Air pollution, soils, grounds and wastewater Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Understand your aquifer contamination site before and after treatment with water quality testing solutions designed to withstand even the harshest environments. Improve remediation project outcomes, accelerate site closures, and reduce total project costs with accurate, stable instruments that provide real-time ...
ByIn-Situ Environmental based in Fort Collins, COLORADO (USA)
Panel mounted OEM pumps; A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including either A.C or D.C. ...
ByVerder Liquids BV - part of the Verder Group based in Vleuten, NETHERLANDS
We can help you manage the lifecycle of your water and wastewater infrastructure. Build, design, and operate raw water transmission, treatment, and distribution systems to deliver potable water or sanitation systems to collect and convey sewerage and storm runoff for treatment. Our multi-discipline design solution will help you design and build better treatment plants. Our solution to plan, design, model, and analyze networks will help you to build better transmission and distribution ...
ByBentley Systems, Incorporated based in Exton, PENNSYLVANIA (USA)
Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: California is currently facing one of the most severe droughts in recorded history. In order to mitigate the drought conditions, various water conservation measures have already been implemented, and others are being considered. One method under consideration is using the advanced treatment of produced water to make it available for irrigation. A major challenge to the success of this method is economically treating the produced water to achieve the quality mandated by California’s irrigation ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
PeCOD Analyzer Improves Pulp Mill Performance, Reduces Wastewater Pollution. MANTECH’s PeCOD technology is a safe and effective solution for improving wastewater treatment and optimizing the use of chemicals in pulp and paper ...
ByMANTECH Inc. based in Guelph, ONTARIO (CANADA)
Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer. ...
ByTeledyne API based in San Diego, CALIFORNIA (USA)
With the demand for power reaching new highs, large power plants are being constructed at an incredible rate. In the years to come, these new plants, along with existing facilities, will be relied upon to meet the needs of a continually growing ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
Water treatment programs within the metal processing industries are integral to the successful manufacturing of quality products. Our water management programs incorporate a complete and in-depth understanding of the mechanical operation of each system being ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
As a supplier to the Big 3 as well as multiple other international automobile and parts manufacturers, ChemTreat is a prominent and growing supplier to the automotive ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
Fluence has decades of experience delivering sustainable water and wastewater solutions to communities large and small. Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Our best-in-class solutions serve the needs of a wide range of food and beverage manufacturers across the globe. Fluence has more than 30 years of experience in delivering water, wastewater, and waste-to-energy projects to the food and beverage industry across the globe. Our unique technologies provide best-in-class treatment for incoming ingredient water, reduce operating costs by turning waste into a resource, and help our customers enhance their ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Using oxygen concentrators helps increase water quality. The use of oxygen concentrators in the water treatment process helps increase the overall concentration of pure oxygen in the water, expelling impurities and contaminants. OSI's oxygen concentrators are portable and adaptable to your needs. Implementing our oxygen concentrators allows facilities to meet production demands without compromising on space or power ...
ByOxygen Solutions Inc (OSI) based in Edmonton, ALBERTA (CANADA)
Our innovative brine treatment and wastewater volume reduction solutions maximize freshwater recovery and minimize brine volume, reducing disposal and transport costs or pond capacity requirements. ...
BySaltworks Technologies based in Richmond, BRITISH COLUMBIA (CANADA)