- Home
- Applications
- canada
- blower system
Show results for
Refine by
Blower System Product Applications In Canada
7 applications found
Premium
Biological treatment in the aeration tank is not only the key stage in prevalent wastewater treatment processes, it is also the most energy-intensive. If operators want to improve the energetic balance of their wastewater treatment plant, optimising the aeration in the aeration tanks gives them a large amount of design leeway. The correct dimensioning of the aerators, the selection of the appropriate technologies and the intelligent data-guided control of the operation in the aeration tank are therefore the focus ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
According to a study by the German Environment Agency , wastewater treatment plants are responsible for around 1% of Germany's total electricity consumption. What initially sounds like a very small percentage, however, offers a highly attractive savings potential from the point of view of individual wastewater treatment plant operators. One typical example of the savings potential in wastewater treatment plants is tank aeration. For example, state-of-the-art blower technologies and demand-driven control technology ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
Water treatment is undergoing a profound transformation and is gaining in importance worldwide. Water is an increasingly scarce commodity. Particularly in poorer countries, it is not available in sufficient quantities. Bottlenecks are becoming more and more severe due to growing demand on the part of industry, agriculture and energy generation. Although problems such as water scarcity are of limited relevance here in Germany, a responsible, resource-saving approach to water is an important issue for the future. ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
The economic efficiency of modern wastewater treatment plants is significantly influenced by the energy consumption of the various process steps during wastewater treatment. The energy-intensive process of biological aeration is a particular focus of attention in this regard: around 60 to 80 percent of the total energy requirement is generated here. At the same time, wastewater tank aeration offers great energy-saving potential that can be exploited by operators of wastewater treatment ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Created as a byproduct of the manufacturing process, dust can not only cause health issues but can be an explosion hazard. Typically, air systems must meet the requirements of NFPA Sections 68, 69, 77, 91, 499, 654 & 644. Allied Blower supplies air NFPA complaint systems for various panel and engineered lumber manufacturing plants, as well as plywood, OSB, MDF, particleboard, LVL, PSL and ...
ByAllied Blower & Sheet Metal Ltd. based in Surrey, BRITISH COLUMBIA (CANADA)
Allied designs and manufactures dust control equipment for many of the grain terminals on the West Coast as well as the inland terminals. Dust control is a major issue when handling grain or agri-bulk commodities. These dusts are combustible and creates environments for explosions. Air quality for these workplaces can also be impacted by high levels of dust. ...
ByAllied Blower & Sheet Metal Ltd. based in Surrey, BRITISH COLUMBIA (CANADA)
Our goal is to facilitate handling dry hydrated lime and dry powder quicklime and render them as operator friendly as their liquid counterparts. We recognize the economic and chemical benefits of using lime in your process and realize that these benefits can be even greater when implementing a well designed system to handle the task. We have also seen and appreciate the problems that many operators are faced with when using poorly designed solution preparation ...
ByCON-V-AIR Solutions based in Sainte-Julie, QUEBEC (CANADA)