- Home
- Applications
- canada
- cleanroom
Refine by
Cleanroom Product Applications In Canada
28 applications found
A cleanroom is a controlled environment that has a low level of pollutants such as gas, dust, airborne microbes, aerosol particles, and chemical vapors. A cleanroom has a controlled level of contamination. The quality of air within a cleanroom is critical. Whether it be for the manufacturing of pharmaceutical products, for operating theatres or sterile services departments there is a legal obligation to have a qualified validation team certify the ...
ByGasera Ltd based in Turku, FINLAND
ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in Saclay, FRANCE
Our system, originally designed for hospitals and cleanrooms, secures ultra pure indoor air in dental practices, laboratories and waiting rooms. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
We have a range of solutions for all production areas and cleanroom ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Who has the time and resources to redesign an entire facility around a dedicated cleanroom or invest in a new HVAC system? The answer is a clean air solution that works with your current shop floor space to keep you in compliance with EHS ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
Ensure production quality in clean zones with superior air decontamination. Genano Technology® is scientifically proven to eliminate nano sized particles and eliminate 99,999% of microbes from indoor air. ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in Espoo, FINLAND
Premium
Environics systems deliver precise gas concentrations for a wide range of clinical and research applications. Tailored to your exact research specifications, the exceptional accuracy makes them the preferred choice for laboratories and research settings requiring reliable and repeatable gas ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
INTRODUCTION Mercury and its compounds are highly toxic substances fo r humans. It occurs naturally and exists in various forms: elemental (or metallic); inorganic (e.g. mercuric chloride); and organic (e.g., methyl- and ethylmercury). These forms all have different toxicities and implications for health. Among naturally occurring mercury compounds, methylme rcury exerts a significant influence (neurotoxic action) on human ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Ozone Generators and Hydroxyls Generators are used for odor elimination, odor control, air purification and to improve indoor air quality. Applications include hospitals, doctors offices, labs, waiting rooms, gyms, locker rooms, restoration clean up, ...
ByInternational Ozone Technologies Group, Inc. (IOTG) based in Delray Beach, FLORIDA (USA)
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Octaform is a manufacturer of a PVC liner panel that will ensure the facility will perform well and meet all compliance requirements / GMP considerations. PVC is essential as it has been proven in cannabis production, pharmaceutical and even surgical facilities because it has the lowest propensity to accumulate molds and other pathogens. In cannabis, it has the added benefit of offering high reflectivity which maximizes the power of the grow ...
ByOctaform Systems Inc. based in Vancouver, BRITISH COLUMBIA (CANADA)
Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
As an EPA-registered solution - 7.8% hydrogen peroxide sole active ingredient - and technology combination, our BIT solution is subject to multiple efficacy tests and has been tested to comply with the highest GLP standards at independent laboratories. TOMI continues updating its BIT label to ensure that we meet and exceed EPA and customer standards for quality and ...
BySteraMist Disinfection based in Frederick, MARYLAND (USA)
Stone cutting is one of the messiest operations in manufacturing – and the most hazardous. When it comes to producing dust, stone cutting generates clouds of dust that is far from harmless. Most concrete, masonry, and stone contain sand that is made of quartz and creates crystalline silica when cut. The inhalation of silica particles can scar the lungs or even lead to silicosis. Of course, you don’t need OSHA and NIOSH to tell you that silica dust is dangerous. What if you had a portable clean air ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
Humidity control is an important factor for stable and predictable pharmaceutical production. From R&D labs to bulk production, humidity can affect both the chemical and mechanical properties of formulations, which can lead to quality issues and Good Manufacturing Practice (GMP) challenges. Laboratory and pharmaceutical product dehumidification systems can be the right solution to help prevent moisture issues during the production process for tablets, capsules, powders, and ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Between manufacturing, MRO, and prototyping R&D, you don’t have time to rearrange your entire facility with the dedicated space and ductwork to shield your employees from airborne hexavalent chromium and VOCs generated during sanding and painting operations. What if you could defend against these air hazards with a portable clean air solution that moves with your manufacturing changeovers and alternating finishing and coating tasks? Duroair’s custom-engineered indoor air filtration systems do just ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)