- Home
- Applications
- canada
- discharge regulations
Refine by
Discharge Regulations Product Applications In Canada
29 applications found
Mining Challenge: Water and tailings management is essential in mine operations and can be especially challenging in remote locations. New and tighter discharge regulations have begun to challenge existing mines due to the limits of operating equipment and technologies, often necessitating the installation of new treatment plants or expansion of tailings and polishing ponds. ...
ByForward Water Technologies Inc. based in Toronto, ONTARIO (CANADA)
Increasing populations are stressing the hydraulic capacities of existing treatment plants with no room for expansion. Regulation discharge limits continue to be lowered, further challenging plant compliance. ...
ByFibraCast based in Hannon, ONTARIO (CANADA)
This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could result in a discharge violation. The local regulators frequently inspected the plant’s discharge to ensure compliance with the discharge ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
During many different processes throughout the metals and mining sector, there is often a lot of excess production of water. Some of this water may indeed be wastewater and will need treating before being discharged back into the environment. Pulsar Measurement offer a range of different flow solutions, from open channel flow, to full and partially filled non-contacting pipe flow. Some of the discharge may be required to be measured to an MCERT standard and we are proud to supply a number of accredited methods to ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Premium
Inspection of flow measurement at relevant discharge point according to German ...
ByNIVUS GmbH based in Eppingen, GERMANY
Pharmaceutical manufacturers generate large volumes of wastewater contaminated with active pharmaceutical ingredients (APIs), solvents and other organics. Managing these streams is expensive, labor intensive and creates safety and logistical challenges. Axine can treat these streams on-site to reduce costs, risk, improve performance and ensure regulatory compliance. The Axine process mineralizes and destroys all types of APIs and other organic contaminants to meet the most stringent discharge requirements. For ...
ByAxine Water Technologies based in Vancouver, BRITISH COLUMBIA (CANADA)
Increasing populations stress hydraulic capacities of existing wastewater treatment plants with no room to expand. Regulators are looking to lower discharge limits, challenging existing plant capabilities. ...
ByFibraCast based in Hannon, ONTARIO (CANADA)
Premium
Safe Navigation – Efficient Port - Systems for meteorological data for ports and harbors. Complete MetOcean systems are designed to monitor traffic conditions to ports and fairways, displaying information on the internet or integrated into existing systems. The primary purpose of the systems is to provide real-time and historical data to VTS operators, ship pilots, ship bridges, harbor authorities, and other public and governmental bodies via the Internet or AIS systems. Harbors and fairways worldwide have ...
ByAanderaa, a Xylem Brand based in Nesttun, NORWAY
Industrial wastewater’s need to treat and remove harmful contaminants prior to discharging into sewers, lakes and rivers. Today many industrial treatment systems are being challenged by the introduction of lower discharge requirements on phosphorous and nitrogen. FibrePlate is an ideal solution in meeting discharge requirements as it is a true UF membrane, easily rejecting contaminants, bacteria and viruses. Robust, flexible and compact, performance is assured over its design life. Utilising innovative dual ...
ByFibraCast based in Hannon, ONTARIO (CANADA)
Drilling mud is usually pumped down the hollow drill pipe to the drill bit where it exits the pipe and is then flushed back up the brehole to the surface. Some muds are then discharged into the environment (via regulated methods), and others are recirculated back into the process for reuse. Pulsar Measurement provide flow solutions to ensure that drilling muds are flowing through pipes at the correct rate, giving an indication of blockages or issues within the process and aids oil ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Eliminate Liquid Discharge to the Environment: Zero Liquid Discharge (ZLD) is a strategic, wastewater management system facilities adopt to avoid discharging industrial wastewater into the environment. This is an engineered approach to water treatment, resulting in water recycle, recovery and reuse. Kurita America has developed a five-phase approach to zero liquid discharge projects, allowing our team to engineer the optimal system for industrial facilities. We model and combine various technologies including ...
ByKurita America Inc. based in Minneapolis, MINNESOTA (USA)
Every pit lake is unique in terms of hydrogeology and geochemistry, and methods to monitor for environmental impact vary. But in every case, it’s important to have accurate groundwater and surface water data for effective mine water ...
ByIn-Situ Environmental based in Fort Collins, COLORADO (USA)
A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Food and beverage processing utilizes substantial amounts of water that must be pumped, processed and treated. Food and beverage wastewater treatment can be a significant concern for facilities that must have economical strategies to meet discharge permit requirements as well as recover potentially valuable resources within the wastewater streams. Additionally, plants will often require solutions to breakdown solids in waste byproducts so they can be effectively pumped, processed or transported. JWC offers a ...
ByJWC Environmental based in Santa Ana, CALIFORNIA (USA)
Seafood Processing utilizes substantial amounts of water that must be pumped, processed and treated. The treatment of the seafood wastewater can be a significant concern for facilities which must have economical strategies to meet discharge permit requirements as well as recover potentially valuable resources within the wastewater streams. Additionally plants will often require solutions to breakdown solids in waste byproducts so they can be effectively pumped, processed, transported or disposed of in the ocean or ...
ByJWC Environmental based in Santa Ana, CALIFORNIA (USA)
WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Application: The majority (around 60%) of the coal seams currently being extracted worldwide are so far underground that open cast mining cannot take place and, therefore, underground mining techniques need to be used. Consequently, workers have to enter and work in confined spaces. One of the major problems that this creates is the dangers from Methane (CH4) gas which occurs in Mine ...
ByEdinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM
Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Our innovative brine treatment and wastewater volume reduction solutions maximize freshwater recovery and minimize brine volume, reducing disposal and transport costs or pond capacity requirements. ...
BySaltworks Technologies based in Richmond, BRITISH COLUMBIA (CANADA)