- Home
- Applications
- canada
- exposure limit
Refine by
Exposure Limit Product Applications In Canada
11 applications found
Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Toluene Diisocyanate (TDI) and Methylenediphenyl diisocyanate (MDI) have exposure limits set by the Occupational Safety and Health Administration (OSHA) to ensure employee protection in polyurethane ...
ByDOD Technologies Inc based in Cary, ILLINOIS (USA)
Anesthetic effect is being safer for patients and health care workers. However, occupational exposure to waste anesthetic gases (WAG) is far from being a problem solved. It is well agreed to keep the occupational exposure to a reasonable minimum by improved scavenging, ventilation and working habits alongside following national occupational exposure limits with waste gas exposure ...
ByGasera Ltd based in Turku, FINLAND
H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. ...
ByUnisearch Associates Inc. based in Concord, ONTARIO (CANADA)
In the effect, up to 20–30 percent of containers in major destination ports can contain air concentrations of chemicals on the level exceeding occupational exposure limits (OEL) and up to 70% of them can contain harmful chemicals. ...
ByGasera Ltd based in Turku, FINLAND
Premium
The almost closed environment means that high levels of air pollution often occur inside the tunnels. The limit values for the pollutants are often higher in tunnels than in open ambient air because the exposure time is normally limited, but it may still be necessary to monitor that the limit values are not exceeded. Traffic tunnels often have to be provided with ventilation to keep the levels of air pollutants below the applicable ...
ByOPSIS AB based in Furulund, SWEDEN
What if you had a portable clean air solution that integrated with your existing floor layout and limited worker exposure to harmful dust ...
ByDuroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA)
Workplace noise monitoring for occupational noise is one of the most overlooked risks in the workplace. Ignoring this hazard can result in fines or prosecution from organisations like the HSE in the ...
ByCirrus Research plc based in Hunmanby, UNITED KINGDOM
In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a good ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient ...
ByProtea Limited based in Middlewich, UNITED KINGDOM