- Home
- Applications
- canada
- gas sampling
Refine by
Gas Sampling Product Applications In Canada
23 applications found
Premium
Check our LNI Swissgas range of gas generators for Sample Evaporation ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Comparison of Technologies A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its ...
ByMetrohm AG based in Herisau, SWITZERLAND
Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
ByENVEA based in Poissy, FRANCE
Premium
Tekran Instruments are versatile. We offer a number of tools to expand the capability of our instrumentation. Unlike any other mercury instrument manufacturer, Tekran offers multiple options for automated mercury speciation measurements in air, emission sources and environmental samples. Additionally, our software provides full access to all instrument features allowing complete method customization. Below are examples of expanded measurement applications that utilize the unique adaptability of Tekran ...
ByTekran Instruments Corporation based in Toronto, ONTARIO (CANADA)
Premium
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Characterization of contaminated groundwater requires detailed monitoring to eliminate data gaps, improve predictive numerical models, and track remedial efforts. The Westbay System is a reliable, cost-effective technology for obtaining detailed information, enabling groundwater professionals to carry out comprehensive and defensible contaminant site investigations and long-term ...
ByWestbay Instruments - part of Nova Metrix LLC based in Burnaby, BRITISH COLUMBIA (CANADA)
AN0016 – Automated multi-species flux measurements with eosAC and Gasmet DX4015/4040 Portable FTIR Gas Analyzers ...
ByEosense Inc based in Dartmouth, NOVA SCOTIA (CANADA)
Protecting a pressurized gas pipeline system from leaks and corrosion and minimizing downtime are among the most important responsibilities that oil and gas companies have. According to the National Association of Corrosion Engineers (NACE) International, corrosion alone costs the industry over $1.3 billion a ...
ByAdvanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA)
One of the largest users of gas detection safety equipment are Chemical Storage and Chemical Manufacturing Plants. Toxic, asphyxiant, and flammable gases are commonly used in manufacturing and are also by products of the manufacturing process. Storage of these gases is done on site in large metal cylinders. The transferring of gas into other containers or to other parts of the plant can release these gases into the air. Portable and Fixed gas detections systems work together to provide a safety net of gas ...
ByDOD Technologies Inc based in Cary, ILLINOIS (USA)
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
Gasmet manufactures portable and powerful gas analyzers for greenhouse gas flux measurements. All key gas compounds can be measured in seconds: N2O, CH4, CO2, H2O, CO and ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND