- Home
- Applications
- canada
- mercury analyzer
Refine by
Mercury Analyzer Product Applications In Canada
20 applications found
Premium
Introduction: Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitative determination of mercury in various environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/Light-915M2 with Zeeman background correction provides direct real-time continuous determination of mercury in air from 0.5 ng/m3 within ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: The determination of mercury in water is one of the most frequently requested analyses for environmental, sanitary and technological purposes. Lumex Instruments RA-915M mercury analyzer, equipped with a special cold vapor accessory, can perform conventional cold vapor atomic absorption spectrometry (CVAAS) technique for the determination of mercury in surface, ground, drinking and waste water as well in atmospheric ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The Jerome family of mercury vapor analyzers makes it easy to comply with MSHA regulations and keep your coworkers safe from mercury vapor. All Jerome analyzers are built in the USA and are tough enough to stand up to the rigors of daily work in a mine. Whether you need a rugged, no-frills mercury analyzer, advanced data management capabilities, ultra-low-level detection, or fixed-point mercury ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Premium
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Direct (without any pre-treatment) atomic absorption or atomic fluorescence mercury determination in food and feed is difficult due to complex organic matrix. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Should “the unexpected” ever include mercury and mercury vapor contamination incident response, trust Jerome mercury vapor analyzers to keep your team and your community ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Premium
The US EPA’s method 30B is designed as a reference method for determination of mercury emissions with stack gases. The method uses sorbent traps to capture total mercury from stack gas. Use of different sorbent traps also enables mercury speciation measurement. Method 30B is widely used for regulatory CEMM verification and for national and international research programs. This technology was also adopted for PRC (HJ 917-2017) and EC (TS ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction : Analysis of soils, bottom and overburden sediments, rocks and ores for mercury content is one of the most common measurements in environmental pollution monitoring and geochemical exploration. Lumex Instruments proposes a rapid and precise method for direct mercury determination using RA-915 series analyzers based on atomic absorption spectroscopy with Zeeman correction of the background absorption (ZAAS). The thermoscanning option enables the ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION The main way of mercury removal from human body is it s urinary excretion, which is an important diagnostic medium for screening examination of population, risk group determination, and diagnostics and treatment of mercury ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Mercury determination in drinking and waste waters is one of the most popular analyses used for environment pollution and sanitary control, as this trace element is considered highly ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Mercury is widely used in chemical industry, electronic s, electric engineering, instrument making, medicine, pesticide and explosives production, etc. A number of techniques and equipment are developed for reclaiming mercury-containing waste, such as soil, sludge, stillage botto ms, slime sediments, fluorescent lamps, mercury-containing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Mercury and its compounds are highly toxic substances fo r humans. It occurs naturally and exists in various forms: elemental (or metallic); inorganic (e.g. mercuric chloride); and organic (e.g., methyl- and ethylmercury). These forms all have different toxicities and implications for health. Among naturally occurring mercury compounds, methylme rcury exerts a significant influence (neurotoxic action) on human ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Mercury is one of the most toxic trace contaminant naturally occurring in the coals. During the coal combustion process at the coal-fired power plants mercury is released into the environment. To manage effectively the stack gas cleaning process, it is necessary to know the mercury content in the coal, and also in stack gas, liquid and solid ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Robust analysis for inspection, investigation, remediation. If you are responsible for monitoring a wide range of environments for mercury contamination, it’s not enough that your instrument is accurate. It must also be responsive, reliable, and rugged. Jerome has the ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)