- Home
- Applications
- canada
- particle sizing
Refine by
Particle Sizing Product Applications In Canada
47 applications found
Acoustics can characterize particle size and zeta potential in ceramic slurries with no dilution. ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Acoustics provides opportunity for characterizing content of nano-particles in cosmetic dispersions with broad Particle size distributions. ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Detail study presented in the paper listed below indicates that Acoustics yields a proper Particle size distribution in various dairy products. This can be achieved with no dilution. ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Acoustics makes possible measurement of Particle size of the emulsion and microemulsion droplets with no dilution, which is critical for these systems. ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Acoustic spectroscopy is a very simple method for sizing of nanoparticles. There are many examples published in the papers that are listed below. There is only one input parameter characterizing particles required for calculating particle size distribution at this size range – density of particles. A big advantage of Acoustics over light-based methods is ability of characterizing broad ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
When crushed, graded and fed into a hot furnace (1,200 oC or 2,200°F), the vermiculite expands or exfoliates to produce a lightweight particle that is then used as an insulating and fire retardant fill. The process requires a very rapid heat transfer to the particles to promote as large an increase in particle size as possible to give low densities. ...
ByTorftech Group based in  Thatcham, UNITED KINGDOM
Premium
The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because the contaminants will either jam up the backwash system or remain in the ...
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Premium
The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because the contaminants will either jam up the backwash system or remain in the ...
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Using any coated abrasive for sanding, polishing, or finishing introduces small amounts of both surfaces into the air. The particle size of the dusts produced in this application depends significantly on the abrasive’s grit size and composition, as well as the material being worked. ...
ByDiversitech based in  Saint-Laurent, QUEBEC (CANADA)
Optimize Multiphase Processes With In Situ Video and Real-Time Particle and Droplet Measurements. Particles and droplets are everywhere in the chemical, consumer products, pulp and paper, and petroleum industries. Particles grow, agglomerate, break, dissolve, and change shape - all of which can have an impact on process performance and product quality. To be successful, chemists and engineers must understand and optimize particle ...
ByMettler - Toledo Int. Inc based in  Greifensee, SWITZERLAND
The particle size distribution is one of the most critical parameters in drug product quality. Real time understanding and control of particles ensures Quality by Design (QbD) in solid and liquid dosage formulation. FBRM and PVM Process Analytical Technologies (PAT) provide in-process real time measurements of particle dimension, particle shape, and particle count. FBRM and PVM are used to promote faster ...
ByMettler - Toledo Int. Inc based in  Greifensee, SWITZERLAND
Air quality monitoring may involve measuring particle mass (PM), particle number concentrations (PN), particle size, or collecting particles for later chemical analysis. ...
ByTSI Incorporated based in  Shoreview, MINNESOTA (USA)
Hydrotech disc filters build an absolute barrier against defined particle sizes, perfect when source water contains microorganisms such as zebra mussel larvae, which can cause huge problems in process ...
ByHydrotech - Veolia Water Technologies AB based in  Vellinge, SWEDEN
Depending on calorific value, composition and particle size, this fuel is used in industrial fluidised bed firings, in cement kilns and in RDF power ...
ByKomptech GmbH based in  Frohnleiten, AUSTRIA
“A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers ...
ByDiversitech based in  Saint-Laurent, QUEBEC (CANADA)
Standard and custom steel hardened cutters are available to meet application needs to ensure proper particle size is reached. JWC also offers an industrial shredder, washer and separator, the Zero Waste Monster, that turns large quantities of waste into a clean and compacted recyclable ...
ByJWC Environmental based in  Santa Ana, CALIFORNIA (USA)
ISO and NAS Cleanliness Codes: Internationally recognized standards are used to quantify the number and size of particles in oil. This chart illustrates both standards, the condition of a typical system, and oil cleanliness levels obtained using G2F. ...
ByL.B.S. Lubrication Units Inc. based in  Ottawa, ONTARIO (CANADA)