- Home
- Applications
- canada
- plant emissions
Refine by
Plant Emissions Product Applications In Canada
20 applications found
Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
If operators want to improve the energetic balance of their wastewater treatment plant, optimising the aeration in the aeration tanks gives them a large amount of design leeway. The correct dimensioning of the aerators, the selection of the appropriate technologies and the intelligent data-guided control of the operation in the aeration tank are therefore the focus when it comes to plant construction. Energy consumption and emissions can be significantly reduced ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in Furulund, SWEDEN
BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Benzene monitoring around refineries: Measuring benzene emissions from a refinery plant can be challenging, but OPSIS makes it easy. ...
ByOPSIS AB based in Furulund, SWEDEN
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. ...
ByOPSIS AB based in Furulund, SWEDEN
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable users to measure hundreds of gases. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Power plants are industrial facilities used to generate electric power with the help of one or more generators which convert different energy sources into electric power. Power plants need to monitor emissions continuously according to local emission regulations. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in Skedsmokorset, NORWAY
Aquamonitrix® nitrite and nitrate analyser for wastewater treatment plants. Control nitrous oxide emissions by using real-time nitrite (and nitrate) data to improve process control in biological nitrogen removal. ...
ByAquamonitrix Ltd. based in Tullow, IRELAND
Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND