- Home
- Applications
- canada
- water analyzer
Refine by
Water Analyzer Product Applications In Canada
28 applications found
Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation ...
ByKytola Instruments Oy based in Muurame, FINLAND
Perform integrated catchment/watershed management modeling with ease, including constituent rural areas, river systems, urban sewer systems, treatment plants, ponds, LIDs and receiving waters. Plan, analyze, design and manage unified sewer systems integral with natural areas and ...
ByComputational Hydraulics International (CHI) based in Guelph, ONTARIO (CANADA)
The only water sensors that monitor water use in real-time and detect leaks and floods. Our intelligent water flow and leak detection solutions analyze normal water usage at your properties and alert you to problems when they occur - protecting you from water damage and high water ...
ByAlert Labs Inc. based in Kitchener, ONTARIO (CANADA)
Premium
Today’s food and beverages (F&B) are much more than just simple "organic fuels" needed for survival. Beyond their nutritive value, they are consumed for their taste or flavor. Increasingly, they are also a source for maintaining health and enhancing our well-being via high-quality nutrition. At the same time, with an ever-increasing number of processed foods, food quality and safety aspects are becoming more important. All the more because foods are highly complex materials – prone to degradation ...
ByMetrohm AG based in Herisau, SWITZERLAND
Real Time Chemical Oxygen Demand Improves Wastewater Management. MANTECH’s PeCOD Analyzer water quality analysis technology provides food and beverage processors with accurate, real time data that enables them to make timely decisions and effectively manage their water and wastewater. The PeCOD Analyzer is a fast, green, accurate alternative to traditional chemical oxygen demand (COD) and biological oxygen demand (BOD) testing for measuring ...
ByMANTECH Inc. based in Guelph, ONTARIO (CANADA)
Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Premium
The US EPA’s method 30B is designed as a reference method for determination of mercury emissions with stack gases. The method uses sorbent traps to capture total mercury from stack gas. Use of different sorbent traps also enables mercury speciation measurement. Method 30B is widely used for regulatory CEMM verification and for national and international research programs. This technology was also adopted for PRC (HJ 917-2017) and EC (TS ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of nitrites in water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of arsenic in drinking water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of selenium in drinking water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of beryllium in drinking water samples using the Fluorat-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
Premium
INTRODUCTION: In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective fluorimetric method for the measurement of the mass ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The Situation: A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could result in a discharge violation. The local regulators frequently inspected the plant’s discharge to ensure compliance with the ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
With our recent acquisition of this leading manufacturer of chemical analyzers for water and wastewater monitoring and control, we now offer a complete monitoring solution that includes analysis systems, multiparameter sondes, drift-resistant sensors, flow meters, and data services for our municipal ...
ByIn-Situ Environmental based in Fort Collins, COLORADO (USA)
ChemTreat offers a complete line of utility, process, and functional chemistries for the pulp and paper industry. We have dedicated field personnel with over 20 years in the industry and experience working with unique specifications, as well as the full range of grade-based and finished product performance ...
ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)
The Solution: Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)