- Home
- Applications
- canada
- water management
Refine by
Industries served
- Water and Wastewater
- Mining
- Manufacturing, Other
- Government
- Food and Beverage
- Construction & Construction Materials
- Defense
- Electronics and Computers
- Commercial
- Medical / Health Care
- Metal
- Chemical & Pharmaceuticals
- Real Estate
- Textile
- Oil, Gas & Refineries
- Agriculture
- Environmental
- Soil and Groundwater
- University / Academia / Research
- Energy
Water Management Product Applications In Canada
102 applications found
Premium
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Fresh water is one of the planets most critical resources essential to all land based life It is also one of the planets most rapidly diminishing resources. Conservation and protection of existing supplies and the rehabilitation of degraded sources are one of the most urgent problems facing humanity ...
ByHeron Instruments Inc. based in  Dundas, ONTARIO (CANADA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
In the era of Industry 4.0, automated machine regulation has come to play an increasingly important role in waste water management. Digital control systems depend on measurement values that are constantly recorded by sensors and have become significantly faster, more accurate and more precise than a manual control system could ever be. ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
StormTank products are designed to provide strong, affordable stormwater management solutions. By allowing for pretreatment and offering underground storage options, this product line protects our environment and creates developable ...
ByBrentwood Industries, Inc. based in  Reading, PENNSYLVANIA (USA)
Premium
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Complex water management infrastructure requires there to be numerous sampling points, treatment processes and countless decisions to be made on a daily basis. ...
ByFREDsense Technologies Corp. based in  Calgary, ALBERTA (CANADA)
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Water treatment programs within the metal processing industries are integral to the successful manufacturing of quality products. Our water management programs incorporate a complete and in-depth understanding of the mechanical operation of each system being ...
ByChemTreat - Veralto based in  Glen Allen, VIRGINIA (USA)
Premium
ByApex Engineering Products Corporation based in  Aurora, ILLINOIS (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
“A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water- activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Water agencies and private water companies are tasked with the challenge of developing and maintaining sustainable water supplies, often centered on groundwater. Since 1987, the Westbay System has provided water managers with the flexibility to characterize groundwater in four-dimensions, leading to the optimization of management activities and the development of sustainable management ...
ByWestbay Instruments - part of Nova Metrix LLC based in  Burnaby, BRITISH COLUMBIA (CANADA)
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
ChemScan is now an In-Situ brand. With our recent acquisition of this leading manufacturer of chemical analyzers for water and wastewater monitoring and control, we now offer a complete monitoring solution that includes analysis systems, multiparameter sondes, drift-resistant sensors, flow meters, and data services for our municipal ...
ByIn-Situ Environmental based in  Fort Collins, COLORADO (USA)
Premium
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facility operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Osmosis is the phenomenon of water molecules passing through a semi-permeable membrane from a region with lower dissolved solids to a region with higher dissolved solids until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)