Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Air and Climate
- Energy
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,203 applications found
Real Time Chemical Oxygen Demand Improves Wastewater Management. MANTECH’s PeCOD Analyzer water quality analysis technology provides food and beverage processors with accurate, real time data that enables them to make timely decisions and effectively manage their water and wastewater. The PeCOD Analyzer is a fast, green, accurate alternative to traditional chemical oxygen demand (COD) and biological oxygen demand (BOD) testing for measuring organics in wastewater. Rapid, reliable and economical testing helps ...
ByMANTECH Inc. based in  Guelph, ONTARIO (CANADA)
As a supplier to the Big 3 as well as multiple other international automobile and parts manufacturers, ChemTreat is a prominent and growing supplier to the automotive ...
ByChemTreat - Veralto based in  Glen Allen, VIRGINIA (USA)
Raman in a Biological Matrix with the ability to distinctly identify molecular ...
ByBruker Corporation based in  Billerica, MASSACHUSETTS (USA)
Bring your process monitoring into the light. Detailed analysis of complex ...
ByBruker Corporation based in  Billerica, MASSACHUSETTS (USA)
Control. Predict. Optimize. Real-Time process analysis for your food and beverage ...
ByBruker Corporation based in  Billerica, MASSACHUSETTS (USA)
Non invasive, non destructive and no sample preparation required. Monitor each step of your production for instant process control ...
ByBruker Corporation based in  Billerica, MASSACHUSETTS (USA)
This technique allows use of aqueous standards for calibration rather than relatively unstable organometallic standards and harmful solvents for the extraction. Microemulsions are thermodynamically stable systems composed of water, oil and surfactant. In some cases, an alcohol is added as a ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Poisonous gases, fumes and sparks are created anytime metals are welded together. It doesn’t matter what type of welding equipment is used or what type of metal is being welded. The fact that welding is among the most common industrial processes means that air filtration for welding and robotic welding is an important ...
ByDiversitech based in  Saint-Laurent, QUEBEC (CANADA)
Additive manufacturing continues to experience rapid growth as companies invest in 3D printing equipment capable of producing plastic and metals based parts. The 3D printing process generates toxic fumes and airborne dust when operators are post-processing and finishing ...
ByDiversitech based in  Saint-Laurent, QUEBEC (CANADA)
Water is a critical component of almost any industry’s process and careful monitoring of water chemistry can have a dramatic impact on your quality, environmental impact, and bottom line. However, it is often difficult for operators to understand how their water chemistry will impact their process, particularly when the tools to acquire that data often don’t exist. This makes it incredibly costly and difficult to acquire the data you need to make decisions. ...
ByFREDsense Technologies Corp. based in  Calgary, ALBERTA (CANADA)
A tomato cannery needed additional treatment to remove suspended solids from their process wastewater. At Heron Innovators, we specialize in the design, development, fabrication, and installation of highly efficient SAF® systems. A pilot trailer was placed at the plant and ran for two months during the 2012 processing season, proving the system’s capabilities and setting the stage for the customer’s order for a complete system to be ...
ByHeron Innovators, Inc. based in  Rocklin, CALIFORNIA (USA)
A tomato cannery needed additional treatment to remove suspended solids from their process wastewater. At Heron Innovators, we specialize in the design, development, fabrication, and installation of highly efficient SAF™ systems. A pilot trailer was placed at the plant and ran for two months during the 2012 processing season, proving the system’s capabilities and setting the stage for the customer’s order for a complete system to be ...
ByHeron Innovators, Inc. based in  Rocklin, CALIFORNIA (USA)
A customer in the municipal solid waste industry needed a solid/liquid separation process as a component of a system solution for disposal of leachate water. At Heron Innovators, we specialize in Suspended Air Flotation systems for wastewater applications, and were contracted to manufacture and install a skid-mounted system to remove flocculated solids prior to disposal in a drainfield. The process incorporated lime softening to remove calcium, a major contributor to TDS, from the leachate wastestream, reducing ...
ByHeron Innovators, Inc. based in  Rocklin, CALIFORNIA (USA)
Energy from organic waste: Fermentation is the most economically and ecologically viable treatment method for a range of organic waste. Clean energy is produced from the decomposed organic material and compost and liquid fertiliser from the fermentation residue. But packaging, contaminants and inert waste prevent direct introduction into the fermentation ...
ByKomptech GmbH based in  Frohnleiten, AUSTRIA
Oil producers are facing the problem of rapidly increasing water content in oil from most of the producing wells. A reliable and rugged sensor which can provide an accurate indication of the percentage of water in the fluid pumped is the first step in reducing to a minimum the water content of the oil produced. Flo·Point™ provides real time measurement on the volume of fluid flowing through the pipe over the whole range of 0-100% water with +/-1% accuracy. The sensor can be installed in line from pump ...
ByE.S.I. Environmental Sensors Inc. based in  Sidney, BRITISH COLUMBIA (CANADA)
New well assessment gathers information on the produced fluid for the producer to determine the economic production capability of the newly drilled well. Flo·Point provides on line, real time information on water content of the oil stream for logging and evaluation of the well to the production team. For producing wells evaluation of the amounts of water produced enables the producer to identify water zones and take remedial action. Flo·Points range of measurement provides for constant indication of ...
ByE.S.I. Environmental Sensors Inc. based in  Sidney, BRITISH COLUMBIA (CANADA)
Farmers in the 21st century are using efficient irrigation technology such as drip systems to maximize their usage of one of our most valuable commodities - water. Water flow rates to irrigated areas can be controlled effectively, concentrating the application of water in the immediate vicinity of the crops and adjusting the quantity of water delivered. The next step in precision irrigation is accurate knowledge of soil moisture content around the crop so that the amount of water and the frequency at which it is ...
ByE.S.I. Environmental Sensors Inc. based in  Sidney, BRITISH COLUMBIA (CANADA)
Tree nurseries use techniques such as large potted seedlings and air-slit containers, to cultivate strong, healthy plants with well-developed root structures. It has been proven that irrigation techniques play a critical role in seedling physiology, however traditional approaches to determining seasonal soil water requirements during the growth period have been typically qualitative, based around the feel of the soil. ...
ByE.S.I. Environmental Sensors Inc. based in  Sidney, BRITISH COLUMBIA (CANADA)
For wine growers it isn't just a question of giving your vines enough water - sometimes they need to stress their grapes by depriving them of moisture to ensure that the fruit reaches the quality sought by the winemaker. In particular, soil moisture levels are critically important to the management of sugar and anthocyanin in the initial stages of ripening right the way through to the production of flavor compounds in the later stages of the lifecycle of the grape. ...
ByE.S.I. Environmental Sensors Inc. based in  Sidney, BRITISH COLUMBIA (CANADA)
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)