Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Energy
- Air and Climate
- Construction & Construction Materials
- Pulp & Paper
- Chemical & Pharmaceuticals
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Logistics
- Banking & Finance / Insurance / Legal
- Retail
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,231 applications found
Trusted by the most recognized data center operators throughout the world, PermAlert offers advanced leak detection systems that protects critical infrastructure from unexpected leaks that could cause service ...
ByPermAlert, a division of Perma-Pipe, Inc. based in Niles, ILLINOIS (USA)
We help organizations protect and improve their supply ...
ByBSI Consulting based in Herndon, VIRGINIA (USA)
We help chemical, oil and gas organizations protect and improve their supply ...
ByBSI Consulting based in Herndon, VIRGINIA (USA)
Modern Water immunoassay test kits offer users the ability to make quantitative measurements of contaminants. Contaminated land and water clean-up is a high priority all over the ...
ByModern Water based in Sand Hutton, UNITED KINGDOM
Rapid return on investment: The nature of industrial waste is highly diverse, but is often associated with extremely high costs for disposal. In many cases onsite treatment with MAGSTM or WETTTM results in a rapid return on investment (ROI). The economic benefits differ from one application to another based on location, the type and quantity of waste and local economic ...
ByTerragon Environmental Technologies Inc. based in Montreal, QUEBEC (CANADA)
Wastewater treatment plants face the need to manage their costs, and one of those costs is in heating cold, untreated sludge to the required temperature. That investment in energy is then lost when the waste flow is released. DDI'S direct sludge-to-sludge heat recovery system pumps incoming sludge through a system of rectangular channels, so it absorbs most of the energy in the hot wasted digested sludge. With DDI Heat Exchangers, there is low risk of plugging due to very large gaps, and the risk of baking to the ...
ByDDI Heat Exchangers Inc. based in Dollard-Des-Ormeaux (Montreal), QUEBEC (CANADA)
Not a day goes by in modern hospitals and health care institutions without the use of inhaled anesthetics for general anesthesia. Inhaled anesthetics have seen a great improvement over time. Anesthetic effect is being safer for patients and health care workers. However, occupational exposure to waste anesthetic gases (WAG) is far from being a problem solved. It is well agreed to keep the occupational exposure to a reasonable minimum by improved scavenging, ventilation and working habits alongside following ...
ByGasera Ltd based in Turku, FINLAND
Use Aquamonitrix® in your manufacturing operation to: Monitor nitrate and nitrite in your water intake in real-time. Optimise nitrogen removal in the wastewater treatment process through NOx-based process control. Monitor treated wastewater discharge for peace of mind and to always be the ‘first to know’ in the event of an accidental exceedance – allowing for corrective action in real-time. Demonstrate excellence in water stewardship and in environmental compliance with your discharge / ...
ByAquamonitrix Ltd. based in Tullow, IRELAND
In our lithium-ion-powered world, battery safety is crucial. Gas analyzers, like the GT6000 Mobilis, support research work preventing disasters caused by thermal runaway reactions. They measure gases such as carbon monoxide, hydrogen fluoride, and VOCs for accurate identification. The GT5000 Terra ensures safety for first responders and EV passengers by measuring gases at the exposure point. Type approval regulations like ECE-R100 and FTIR technology in GT5000 Terra align with safety mandates. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Finding the right gas detector, and making sure it is in perfect working order, can mean the difference between life and death in environments where poisonous gases potentially exist. Confined space should be regularly tested to ensure atmospheric conditions remain safe. If workers exit a space and later need to re-enter, the atmosphere needs to be tested again for oxygen, combustible gases and toxic gases and ...
ByConcept Controls Inc based in Burnaby, BRITISH COLUMBIA (CANADA)
Phathom sensors can be deployed on construction sites to help manage sediment and erosion control. Applications include monitoring sediment retention ponds, use in dewatering systems in combination with silt busters, clarifiers, flocculant dosing, and other equipment, and stormwater ...
ByPhathom based in Pukekohe, NEW ZEALAND
Many sewer rising mains have several things in common: They are a critical asset to the owner, as it is often complicated to divert the flow for an extended period of time. The accessibility to the pipe is often difficult, as the mains run through densely populated or environmentally sensitive areas or under creeks and main roads. The pipelines often have several bends in their route. Defective sewer rising mains have the potential to cause pollution, damage property and neighbouring services, resulting in ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Pipelines installed in, under or along bridges have one universal problem: The access to the existing main is always limited, which makes traditional repair or replacement options either extremely expensive or even impossible. Being generally in good condition, a lot of bridge pipelines suffer from corrosion and are therefore no longer capable of carrying the pressure load. In addition, preventative maintenance of these pipes is recommended to protect the bridge construction. The Primus Line® system is the ...
ByRädlinger primus line GmbH based in Cham, GERMANY
City centres – as different as they may look around the world, they all share a few common problems: traffic congestion, high population and air pollution are just a few of them. Therefore, open trench work such as the rehabilitation of a crucial pipeline can give rise to substantial challenges. Not only do such large-scale projects contribute to the frustration of commuters and residents alike, additional noise and CO2 emissions also have the potential to tremendously aggravate pre-existing health ...
ByRädlinger primus line GmbH based in Cham, GERMANY
In order to install a new drinking water pipe under a water way, horizontal directional drilling (HDD) can be a suitable method. However, if there is already an existing pipe that needs renovation, significant cost and time savings can be realised by using relining methods like Primus Line®. By using the existing pipe, geotechnical and hydrogeological issues are eliminated and construction risk is minimised. The pipes are often characterised by long lengths with bends in the pipe route and are only accessible ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Drinking water pipes underneath roads pose several challenges: open-trench replacement is not feasible since road closures affect people’s daily lives for a long period of time until the works have been carried out. In addition, there is significant cost for surface restoration. In case of railway crossings, permits from the railway operator need to be obtained in order to work within the railway corridor. These pipes are often laid with bends, even multiple sharp bends that change direction. Furthermore, ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Many industrial pipelines operate 24/7. They transport brine or process water and are often rated to a design pressure of over 16 bar. As these pipelines are a substantial component to a respective production process of the asset owner, downtimes have to be kept to a minimum. Due to the strength of the aramid reinforcement, the Primus Line® system can be used to rehabilitate industrial pipes that are rated to a design pressure of 16 bar and above despite the low wall thickness of the liner. ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Vertical pipelines are often installed in chambers and tunnels of limited accessibility, which makes the use of heavy machinery either impossible or exceptionally expensive and time consuming. Due to its low weight, the flexible Primus Liner can easily be dragged by hand over long distances to the designated pipeline and be fed manually top to bottom into the existing pipe. Only a small compressor will be necessary to inflate the pre-folded liner after the installation. ...
ByRädlinger primus line GmbH based in Cham, GERMANY
Even for pipelines demand changes over time. Where decades ago a sewer line made sense, today there is perhaps the need for a gas pipeline. In these scenarios, existing pipe material only rarely is directly suited for the new intended use. Be it that the material does not withstand the required pressure, is not resistant against the new medium or simply is leaky. Primus Line® is the ideal solution here. With it, nearly every pipe or conduit can be turned into a pressurised pipe for water, gas or ...
ByRädlinger primus line GmbH based in Cham, GERMANY
These are pipelines that can withstand high pressures of up to 20 bar, whereas a conventional bypass is only designed for 10 bar. The pipelines are laid above ground for a limited period of time, mainly to transport wastewater or production water to or from oil, gas or mining production sites. Laying these pipes is useful for short-term activities and in cases where an underground pipeline is considered impractical. In addition, they have a smaller environmental footprint: they are a trenchless solution, require ...
ByRädlinger primus line GmbH based in Cham, GERMANY