Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Air and Climate
- Energy
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,203 applications found
Problem: To operate safely and efficiently, cargo ships take in water to provide stability. This water, referred to as ballast, carries all kinds of bacteria, microbes and micro-algae. The ballast water must inevitably be discharged when the ship takes on cargo, often thousands of kilometers away from the port of origin, transferring pathogens and aquatic organisms that can cause serious environmental, economic and health ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Problem: Water is fundamental for numerous manufacturing processes. Contaminated or poor quality process water can cause significant operational problems and compromise the quality of the ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Bottom Ash Pond Replacement: When coal is burned, two major forms of ash are produced. The fly ash is light and leaves the furnace with hot gases. The bottom ash is heavy and stays in the furnace until it is scraped out. Due to potential liability issues and/or the need to find new real estate at power plants for expansion, many utilities must replace their traditional coal ash ponds. Utilities using traditional hydro bins can accomplish this by installing a system using solids contact clarifiers and dewatering ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
The application possibilities of the KAHL pelleting press are numerous: For example, for wood wastes, straw, agricultural biomass, waste paper, household and industrial waste, waste tires, sewage sludge, waste plastics and many ...
ByAmandus Kahl GmbH & Co. KG based in  Reinbek, GERMANY
Sustainability and recycling are becoming increasingly important issues. "What happens to the waste produced?" AMANDUS KAHL plants provide the answers to these ...
ByAmandus Kahl GmbH & Co. KG based in  Reinbek, GERMANY
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
ByEcomesure based in  Saclay, FRANCE
Particle Measuring Systems has put together a team of industry experts and solutions to help you better understand and meet 21 CFR Part 11. Start here by watching an on-demand webinar, reading a paper, viewing our particle counter and data management solutions, or submitting a question to our ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
There are two papers published on subject of applicability of ultrasound for characterizing CMP slurries, see below. There are also 2 newsletters, # 1 and # 13 on the same subject. Acoustics provides accurate particle size that agrees well with independent data. It can monitor presence of 1% large particles on the background of small nano-particles. Electroacoustics yields very precise value of zeta potential. These measurements can be done with no dilution, which opens possibility for continuous on-line control ...
ByDispersion Technology, Inc. (DTI) based in  Bedford Hills, NEW YORK (USA)
Our system, originally designed for hospitals and cleanrooms, secures ultra pure indoor air in dental practices, laboratories and waiting rooms. Safeguarding staff and patients from small particles as small as 0.003 μm is an essential part of dental ...
ByGenano Industrial Air Purification Solutions - Genano Ltd. based in  Espoo, FINLAND
Healthy Oil – No Problem: Generation 2™ elements remove water at 99.97% from oil, dramatically decreasing the formation of acids, diminishing the accelerated depletion of additives, keeping the Total Base Number (TBN) at a high level. By removing ultra-fine particles down to 1 micron, there is significantly less of a burden placed on the additives with less dirt to suspend, dramatically reducing mechanical wear while safely extending the oil change ...
ByL.B.S. Lubrication Units Inc. based in  Ottawa, ONTARIO (CANADA)
Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified ...
ByUnisearch Associates Inc. based in  Concord, ONTARIO (CANADA)
Whether you are in the city, suburb or at a weekend getaway location, noise is an important factor in determining your quality of life or the success of your business. Many areas have local noise legislation that defines the noise limits that can be produced and experienced during the day or at night. This noise may be generated by vehicle traffic, aircraft, industrial sites, construction projects, entertainment events, or many other activities. ...
ByLarson Davis, a division of PCB Piezotronics based in  Depew, NEW YORK (USA)
The Biral sensors provide reliable, consistently accurate weather information day and night. This allows timely decisions to be made about spraying or gritting road surfaces and for switching road warning signs, achieving the best results from limited and valuable resources. In addition to the visibility and present weather sensors, Biral are the appointed UK Distributor for the meteorological instrument manufacturer, Adolf Thies GmbH & Co. KG. The Thies Clima range of meteorological sensors is highly ...
ByBristol Industrial & Research Associates Ltd (Biral) based in  Portishead, UNITED KINGDOM
Collect the most accurate short- and long-term water level and water quality data for your project using In-Situ equipment. We design and manufacture every instrument to perform under harsh conditions for ...
ByIn-Situ Environmental based in  Fort Collins, COLORADO (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Monitoring in raw water can provide operators with immediate information to facilitate adequate treatment. Trace (heavy) metals can naturally occur in surface and ground waters or may arise from industrial environmental discharge. ...
ByModern Water based in  Sand Hutton, UNITED KINGDOM
Trace (heavy) metal laden waste waters are generated in a large number of industrial processes and mineral extraction and smelting processes. ...
ByModern Water based in  Sand Hutton, UNITED KINGDOM