Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Mining
- Medical / Health Care
- Environmental
- Air and Climate
- Energy
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Automobile & Ground Transport
- Waste and Recycling
- Commercial
- Soil and Groundwater
- University / Academia / Research
- Health and Safety
- Aerospace & Air Transport
- Electronics and Computers
- Defense
- Glassware
- Plastics & Resins
- Government
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Real Estate
- Textile
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Dry Cleaning
- Household Appliances
Xprt Product Applications In Canada
3,203 applications found
During many different processes throughout the metals and mining sector, there is often a lot of excess production of water. Some of this water may indeed be wastewater and will need treating before being discharged back into the environment. Pulsar Measurement offer a range of different flow solutions, from open channel flow, to full and partially filled non-contacting pipe flow. Some of the discharge may be required to be measured to an MCERT standard and we are proud to supply a number of accredited methods to ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Industrial hygiene is the set of procedures established to help control environmental factors that could affect an employee’s health. Industrial hygiene involves identifying, evaluating and, when appropriate, eliminating biological, physical and chemical agents that can be found within the work place. ECOMESURE offers a broad range of instruments to measure the air quality in factories and/or industrial plants, following working conditions ...
ByEcomesure based in  Saclay, FRANCE
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
ByEcomesure based in  Saclay, FRANCE
Oil and water both play a major role in processing industrial metals such as steel, aluminum, brass, and copper. Removing oil, dirt, coatings, and metal fines from the water and oil can significantly affect your product quality, throughput, and ...
ByTrucent based in  Dexter, MICHIGAN (USA)
Universities and school building rehabilitations include the lining of water, drain and mechanical piping systems. NuFlow manufactures and installs complete inside infrastructure solutions for any commercial facility or structure including office buildings, multi-unit residential buildings, schools, restaurants, museums, hospitals and more. NuFlow understands the importance of keeping your business open and not disrupting tenants. NuFlow offers pipe repair solutions that minimize tenant displacement, demolition ...
ByNu Flow Corporate based in  San Diego, CALIFORNIA (USA)
SolarWall heating systems have been used by hundreds of municipalities around the world to achieve a variety of objectives. For some it is about ensuring that all new buildings are being constructed to the latest energy standards that include on-site renewable energy generation. For others, it may be about improving indoor air quality or reducing energy costs in older buildings. And some want to showcase the use of solar energy technologies to promote greater awareness within the community in terms of what is ...
ByConserval Engineering Inc. based in  Toronto, ONTARIO (CANADA)
Why have thousands of customers said yes to SolarWall heating' Because of its myriad capabilities in the industrial arena. SolarWall systems perform a wide range of functions, including; solar heating of ventilation air; reduction of building heat loss; and elimination of hot air stratification at ceiling level, which all combine to produce huge energy ...
ByConserval Engineering Inc. based in  Toronto, ONTARIO (CANADA)
Reverse engineering is a process that involves measuring a physical object and reconstructing it as a 3D model to recover the design intent—a perfect reconstruction of the original design—in terms of simple analytical surfaces (planes, cylinders, etc.) and freeform surfaces (NURBS) in order to produce a new reference CAD model. As CAD engineers and industrial designers, you have the critical task of adapting and maintaining parts with shapes that are frequently organic and complex. Since the CAD models ...
ByCreaform - AMETEK, Inc based in  Lévis, QUEBEC (CANADA)
Dimensional quality control (QC) is a process that measures the dimensions of manufactured parts to ensure that they adhere to a defined set of quality criteria and match customers’ requirements. Quality assurance (QA), on the other hand, consists of a set of procedures that prevent mistakes and defects in the different steps of the manufacturing process in order to avoid non-compliance when delivering parts to ...
ByCreaform - AMETEK, Inc based in  Lévis, QUEBEC (CANADA)
Dilute 400 ml REZFREE® with minimum 20 gal (80 Lt) water per acre (4 decares) and spray the diluted solution directly to leaves.Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this cultivation. Dilute 1000 ml REZFREE® with 50 gal (200 Lt) water and apply directly to the 5.000 sets (bags) used in this ...
ByTexas BioTechnology Inc based in  Richmond, TEXAS (USA)
When leaks go unnoticed, not only can it cause major structural integrity damage to buildings, but it can delay the business operations and office schedules. Protect your facility with PermAlert leak detection systems that will detect leaks before it becomes a major ...
ByPermAlert, a division of Perma-Pipe, Inc. based in  Niles, ILLINOIS (USA)
The building materials industry trusts Dürr's regenerative thermal oxidizer (RTO), wet electrostatic precipitator (WESP) and wet scrubber technologies to effectively control emissions, including volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and odors associated with the production of building materials. As an industry leader, Dürr offers a broad range of advanced air pollution control products to meet even the most stringent air emission regulations and odor ...
ByDürr Systems, Inc. based in  De Pere, WISCONSIN (USA)
Helping you deliver quality food that’s safe and sustainable. Deliver quality food that’s safe and ...
ByBSI Consulting based in  Herndon, VIRGINIA (USA)
Find out how we help transportation organizations protect and improve their supply ...
ByBSI Consulting based in  Herndon, VIRGINIA (USA)
ARTeMIS Modal Pro has a series of plugin modules designed for Structural Health Monitoring purposes. All modules are designed to analyse and present the health of a monitored structure in various manners, and they all rely on the same common data manager base module. This module administrates the recorded measurement files as well as the results obtained during a periodic ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Oil companies might discharge produced water from their facilities to a local sea or inject it into a production or disposal formation, depending on local requirements. The discharged water quality at these facilities must be monitored for oil concentration to control process upsets and environmental issues. When oil field operators want to monitor the performance of their water treatment system, they have the choice to use the regulatory method or a field method. The field methods are generally faster and easier ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in  Edmonton, ALBERTA (CANADA)
Modern Water’s ATP test is the first step in determining the effectiveness of a biocide treatment program. Microbiological growth within a cooling water system if not controlled can result in the formation of biological fouling layers (biofilm) on all surfaces in contact with the ...
ByModern Water based in  Sand Hutton, UNITED KINGDOM
Modern Water offers the Microtox technology for assessing industrial pre-treatment. Regulatory compliance guides the testing performed within most wastewater facilities to help understand the process of the plant affects the final effluent stream being released into a sewer system, a secondary treatment system, river or other body of ...
ByModern Water based in  Sand Hutton, UNITED KINGDOM
Streamline the design and analysis of stormwater management control strategies for minimizing events such as combined sewer overflows, sanitary sewer overflows, water in basements, surcharging, street flooding and/or rainfall-dependent inflow and ...
ByComputational Hydraulics International (CHI) based in  Guelph, ONTARIO (CANADA)
Other industries such as waste management (landfill leachate), petrochemicals, oil refining, upstream oil and gas, auto manufacturing, pulp and paper, and textiles also generate wastewater streams and aqueous waste contaminated with problem organics that can be treated on-site by ...
ByAxine Water Technologies based in  Vancouver, BRITISH COLUMBIA (CANADA)